Here's my dmesg output ---------------------------------------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-12) (wa...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Mon Dec 15 18:15:07 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007feb0000 (usable) [ 0.000000] BIOS-e820: 000000007feb0000 - 000000007febe000 (ACPI data) [ 0.000000] BIOS-e820: 000000007febe000 - 000000007fef0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fefe000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Entering add_active_range(0, 0, 523952) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523952 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523952 [ 0.000000] On node 0 totalpages: 523952 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 292274 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000FA0C0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7FEB0000, 003C (r1 121707 RSDT1508 20071217 MSFT 97) [ 0.000000] ACPI: FACP 7FEB0200, 0084 (r2 121707 FACP1508 20071217 MSFT 97) [ 0.000000] ACPI: DSDT 7FEB04A0, 50BD (r1 0AAAA 0AAAA000 0 INTL 20051117) [ 0.000000] ACPI: FACS 7FEBE000, 0040 [ 0.000000] ACPI: APIC 7FEB0390, 0078 (r1 121707 APIC1508 20071217 MSFT 97) [ 0.000000] ACPI: MCFG 7FEB0410, 003C (r1 121707 OEMMCFG 20071217 MSFT 97) [ 0.000000] ACPI: WDRT 7FEB0450, 0047 (r1 121707 VT-8237S 20071217 MSFT 97) [ 0.000000] ACPI: OEMB 7FEBE040, 0061 (r1 121707 OEMB1508 20071217 MSFT 97) [ 0.000000] ACPI: HPET 7FEB5560, 0038 (r1 121707 VT-8237S 20071217 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7fefe000:7ed02000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519858 [ 0.000000] Kernel command line: root=/dev/sda2 ro quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] mapped IOAPIC to ffff9000 (fecc0000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2000.179 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 2067936k/2095808k available (1769k kernel code, 26668k reserved, 752k data, 244k init, 1178304k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba46b - 0xc0376620 ( 752 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba46b (1769 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.083837] Calibrating delay using timer specific routine.. 4003.06 BogoMIPS (lpj=8006133) [ 0.083874] Security Framework initialized [ 0.083881] SELinux: Disabled at boot. [ 0.083886] Capability LSM initialized [ 0.083900] Mount-cache hash table entries: 512 [ 0.084005] Initializing cgroup subsys ns [ 0.084005] Initializing cgroup subsys cpuacct [ 0.084005] Initializing cgroup subsys devices [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.084005] CPU: L2 cache: 1024K [ 0.084005] CPU: Physical Processor ID: 0 [ 0.084005] CPU: Processor Core ID: 0 [ 0.084005] Intel machine check architecture supported. [ 0.084005] Intel machine check reporting enabled on CPU#0. [ 0.084005] using mwait in idle threads. [ 0.084005] Checking 'hlt' instruction... OK. [ 0.100006] ACPI: Core revision 20080321 [ 0.108006] ENABLING IO-APIC IRQs [ 0.108006] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.147644] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 0.148009] Booting processor 1/1 ip 6000 [ 0.156009] Initializing CPU#1 [ 0.156009] Calibrating delay using timer specific routine.. 4000.13 BogoMIPS (lpj=8000275) [ 0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.156009] CPU: L2 cache: 1024K [ 0.156009] CPU: Physical Processor ID: 0 [ 0.156009] CPU: Processor Core ID: 1 [ 0.156009] Intel machine check architecture supported. [ 0.156009] Intel machine check reporting enabled on CPU#1. [ 0.236014] CPU1: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.240015] Brought up 2 CPUs [ 0.240015] Total of 2 processors activated (8003.20 BogoMIPS). [ 0.240015] CPU0 attaching sched-domain: [ 0.240015] domain 0: span 0-1 [ 0.240015] groups: 0 1 [ 0.240015] CPU1 attaching sched-domain: [ 0.240015] domain 0: span 0-1 [ 0.240015] groups: 1 0 [ 0.240015] net_namespace: 660 bytes [ 0.240015] Booting paravirtualized kernel on bare hardware [ 0.240015] NET: Registered protocol family 16 [ 0.240015] ACPI: bus type pci registered [ 0.240015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.240015] PCI: Not using MMCONFIG. [ 0.240015] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.240015] PCI: Using configuration type 1 for base access [ 0.240015] Setting up standard PCI resources [ 0.248015] ACPI: EC: Look up EC in DSDT [ 0.260249] ACPI: Interpreter enabled [ 0.260252] ACPI: (supports S0 S1 S3 S4 S5) [ 0.260267] ACPI: Using IOAPIC for interrupt routing [ 0.260325] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.264552] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.264552] PCI: Using MMCONFIG for extended config space [ 0.272855] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.272855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.273174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.273258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] [ 0.276487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] [ 0.276616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.291975] ACPI: PCI Root Bridge [PCI1] (0000:80) [ 0.291975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] [ 0.295975] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.295975] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.295975] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.295975] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.295975] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.295975] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.295975] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.295975] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.295975] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 6F, should be 62 [20080321] [ 0.295975] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.295975] pnp: PnP ACPI init [ 0.295975] ACPI: bus type pnp registered [ 0.299975] pnp: PnP ACPI: found 16 devices [ 0.299975] ACPI: ACPI bus type pnp unregistered [ 0.299975] PnPBIOS: Disabled by ACPI PNP [ 0.299975] PCI: Using ACPI for IRQ routing [ 0.304475] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.304480] hpet0: 3 32-bit timers, 14318180 Hz [ 0.305530] ACPI: RTC can wake from S4 [ 0.312464] system 00:07: ioport range 0x3e0-0x3e7 has been reserved [ 0.312467] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.312470] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.312473] system 00:07: ioport range 0x400-0x41f has been reserved [ 0.312476] system 00:07: iomem range 0xfecc0000-0xfecc0fff could not be reserved [ 0.312479] system 00:07: iomem range 0xfed02000-0xfed02fff has been reserved [ 0.312486] system 00:0b: ioport range 0xa00-0xa0f has been reserved [ 0.312489] system 00:0b: ioport range 0xa10-0xa1f has been reserved [ 0.312495] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.312498] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.312503] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.312510] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.312512] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 0.312515] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.312518] system 00:0e: iomem range 0x100000-0x7fefffff could not be reserved [ 0.312521] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.343974] PCI: Bridge: 0000:00:01.0 [ 0.343974] IO window: disabled. [ 0.343974] MEM window: disabled. [ 0.343974] PREFETCH window: disabled. [ 0.343974] PCI: Bridge: 0000:00:02.0 [ 0.343974] IO window: e000-efff [ 0.343974] MEM window: 0xfa000000-0xfeafffff [ 0.343974] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.343974] PCI: Bridge: 0000:00:03.0 [ 0.343974] IO window: disabled. [ 0.343974] MEM window: disabled. [ 0.343974] PREFETCH window: disabled. [ 0.343974] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.343974] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 [ 0.343974] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.343974] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31 [ 0.343974] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 0.343974] NET: Registered protocol family 2 [ 0.357388] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.357619] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.359559] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.359931] TCP: Hash tables configured (established 131072 bind 65536) [ 0.359934] TCP reno registered [ 0.366846] NET: Registered protocol family 1 [ 0.366972] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 0.510430] Switched to high resolution mode on CPU 0 [ 0.593362] it is [ 0.838670] Freeing initrd memory: 6037k freed [ 0.839588] audit: initializing netlink socket (disabled) [ 0.839588] type=2000 audit(1230807986.828:1): initialized [ 0.839593] highmem bounce pool size: 64 pages [ 0.839593] Total HugeTLB memory allocated, 0 [ 0.839593] VFS: Disk quotas dquot_6.5.1 [ 0.839593] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.839593] msgmni has been set to 1750 [ 0.839593] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.839593] io scheduler noop registered [ 0.839593] io scheduler anticipatory registered [ 0.839593] io scheduler deadline registered [ 0.839593] io scheduler cfq registered (default) [ 0.839593] PCI: VIA PCI bridge detected.Disabling DAC. [ 0.843590] pci 0000:02:00.0: Boot video device [ 0.843590] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.843590] assign_interrupt_mode Found MSI capability [ 0.843590] Allocate Port Service[0000:00:02.0:pcie00] [ 0.843590] Allocate Port Service[0000:00:02.0:pcie01] [ 0.843590] Allocate Port Service[0000:00:02.0:pcie02] [ 0.843590] Allocate Port Service[0000:00:02.0:pcie03] [ 0.843590] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 0.843590] assign_interrupt_mode Found MSI capability [ 0.843590] Allocate Port Service[0000:00:03.0:pcie00] [ 0.843590] Allocate Port Service[0000:00:03.0:pcie01] [ 0.843590] Allocate Port Service[0000:00:03.0:pcie02] [ 0.843590] Allocate Port Service[0000:00:03.0:pcie03] [ 0.843590] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support [ 0.845497] AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC support [ 0.847589] isapnp: Scanning for PnP cards... [ 1.203370] isapnp: No Plug & Play device found [ 1.208173] hpet_resources: 0xfed00000 is busy [ 1.208173] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.208173] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.208173] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.208174] brd: module loaded [ 1.208174] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.208174] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.208174] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.208174] mice: PS/2 mouse device common for all mice [ 1.208174] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 [ 1.208174] rtc0: alarms up to one year, y3k [ 1.208174] cpuidle: using governor ladder [ 1.208174] cpuidle: using governor menu [ 1.208174] No iBFT detected. [ 1.208565] TCP cubic registered [ 1.208565] NET: Registered protocol family 17 [ 1.208565] Using IPI No-Shortcut mode [ 1.208565] registered taskstats version 1 [ 1.208728] rtc_cmos 00:09: setting system clock to 2009-01-01 11:06:28 UTC (1230807988) [ 1.208842] Freeing unused kernel memory: 244k freed [ 1.231902] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.288263] ACPI: SSDT 7FEBE0B0, 0214 (r1 AMI CPU1PM 1 INTL 20051117) [ 1.292151] ACPI: ACPI0007:00 is registered as cooling_device0 [ 1.292151] ACPI: Processor [CPU1] (supports 16 throttling states) [ 1.292151] ACPI: SSDT 7FEBE2D0, 0143 (r1 AMI CPU2PM 1 INTL 20051117) [ 1.294579] ACPI: ACPI0007:01 is registered as cooling_device1 [ 1.294584] ACPI: Processor [CPU2] (supports 16 throttling states) [ 1.586407] No dock devices found. [ 1.603856] SCSI subsystem initialized [ 1.614155] libata version 3.00 loaded. [ 1.630226] usbcore: registered new interface driver usbfs [ 1.630226] usbcore: registered new interface driver hub [ 1.634227] sata_via 0000:00:0f.0: version 2.3 [ 1.634227] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21 [ 1.634227] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 1.638228] scsi0 : sata_via [ 1.638228] usbcore: registered new device driver usb [ 1.638228] Uniform Multi-Platform E-IDE driver [ 1.638228] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.638228] scsi1 : sata_via [ 1.640968] ata1: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 21 [ 1.640968] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 21 [ 1.657716] USB Universal Host Controller Interface driver v3.0 [ 1.668186] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.723686] Floppy drive(s): fd0 is 1.44M [ 1.740937] FDC 0 is a post-1991 82077 [ 1.850168] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.013843] ata1.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL01, max UDMA/100 [ 2.030346] ata1.00: configured for UDMA/100 [ 2.233641] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.289637] ata2.00: HPA detected: current 156299375, native 156301488 [ 2.289637] ata2.00: ATA-7: SAMSUNG HD080HJ, WT100-41, max UDMA7 [ 2.289637] ata2.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.509931] ata2.00: configured for UDMA/133 [ 2.513306] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL01 PQ: 0 ANSI: 5 [ 2.513447] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD080HJ WT10 PQ: 0 ANSI: 5 [ 2.517615] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 2.517615] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 2.517615] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 2.517615] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c480 [ 2.517615] usb usb1: configuration #1 chosen from 1 choice [ 2.517615] hub 1-0:1.0: USB hub found [ 2.517615] hub 1-0:1.0: 2 ports detected [ 2.633366] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.633366] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.633366] usb usb1: Product: UHCI Host Controller [ 2.633366] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 2.633366] usb usb1: SerialNumber: 0000:00:10.0 [ 2.633366] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22 [ 2.633366] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 2.633366] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 2.633366] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000c800 [ 2.633366] usb usb2: configuration #1 chosen from 1 choice [ 2.633366] hub 2-0:1.0: USB hub found [ 2.633366] hub 2-0:1.0: 2 ports detected [ 2.778272] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.778276] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.778279] usb usb2: Product: UHCI Host Controller [ 2.778280] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 2.778282] usb usb2: SerialNumber: 0000:00:10.1 [ 2.779646] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21 [ 2.779646] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 2.779646] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 2.779646] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c880 [ 2.779646] usb usb3: configuration #1 chosen from 1 choice [ 2.779646] hub 3-0:1.0: USB hub found [ 2.779646] hub 3-0:1.0: 2 ports detected [ 2.900048] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.900051] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.900054] usb usb3: Product: UHCI Host Controller [ 2.900055] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 2.900057] usb usb3: SerialNumber: 0000:00:10.2 [ 2.901132] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 2.901132] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 2.901132] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 2.901132] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000cc00 [ 2.901132] usb usb4: configuration #1 chosen from 1 choice [ 2.901132] hub 4-0:1.0: USB hub found [ 2.901132] hub 4-0:1.0: 2 ports detected [ 2.935651] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 3.001201] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.001201] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.001201] usb usb4: Product: UHCI Host Controller [ 3.001201] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 3.001201] usb usb4: SerialNumber: 0000:00:10.3 [ 3.001201] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 3.001201] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 3.001201] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 3.001201] ehci_hcd 0000:00:10.4: debug port 1 [ 3.001201] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9fffc00 [ 3.096280] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.096280] usb usb5: configuration #1 chosen from 1 choice [ 3.096280] hub 5-0:1.0: USB hub found [ 3.096280] hub 5-0:1.0: 8 ports detected [ 3.199865] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.199868] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.199870] usb usb5: Product: EHCI Host Controller [ 3.199872] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd [ 3.199874] usb usb5: SerialNumber: 0000:00:10.4 [ 3.199865] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 3.199865] eth0: VIA Rhine II at 0x1c000, 00:1d:92:44:2a:d2, IRQ 23. [ 3.199865] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000. [ 3.204282] VP_IDE: IDE controller (0x1106:0x0571 rev 0x07) at PCI slot 0000:00:0f.1 [ 3.204282] VP_IDE: not 100% native mode: will probe irqs later [ 3.204282] VP_IDE: VIA vt8237s (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 3.204282] ide0: BM-DMA at 0xfc00-0xfc07 [ 3.204282] ide1: BM-DMA at 0xfc08-0xfc0f [ 3.204282] Probing IDE interface ide0... [ 3.235979] Driver 'sr' needs updating - please use bus_type methods [ 3.243747] Driver 'sd' needs updating - please use bus_type methods [ 3.247860] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.247860] Uniform CD-ROM driver Revision: 3.20 [ 3.247860] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.251860] sd 1:0:0:0: [sda] 156299375 512-byte hardware sectors (80025 MB) [ 3.251860] sd 1:0:0:0: [sda] Write Protect is off [ 3.251860] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.251860] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.251860] sd 1:0:0:0: [sda] 156299375 512-byte hardware sectors (80025 MB) [ 3.251860] sd 1:0:0:0: [sda] Write Protect is off [ 3.251860] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.251860] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.251860] sda: sda1 sda2 sda3 [ 3.275652] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 3.275652] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.283648] sd 1:0:0:0: [sda] Attached SCSI disk [ 3.526563] usb 1-1: device not accepting address 2, error -71 [ 3.585516] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 3.644978] hda: Maxtor 6E040L1, ATA DISK drive [ 4.336004] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 4.336153] hda: UDMA/133 mode selected [ 4.336293] Probing IDE interface ide1... [ 4.775150] usb 5-1: new high speed USB device using ehci_hcd and address 2 [ 4.921080] usb 5-1: configuration #1 chosen from 1 choice [ 4.921417] usb 5-1: New USB device found, idVendor=067b, idProduct=2506 [ 4.921420] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.921423] usb 5-1: Product: Mass Storage Device [ 4.921424] usb 5-1: Manufacturer: Prolific Technology Inc. [ 4.921426] usb 5-1: SerialNumber: 0 [ 4.921432] hub 5-0:1.0: over-current change on port 2 [ 4.943675] Initializing USB Mass Storage driver... [ 4.956211] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.956646] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.971642] hda: max request size: 512KiB [ 4.971642] hda: Host Protected Area detected. [ 4.971642] current capacity is 80291135 sectors (41109 MB) [ 4.971642] native capacity is 80293248 sectors (41110 MB) [ 4.987583] hda: Host Protected Area disabled. [ 4.987583] hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=16383/255/63 [ 4.987583] hda: cache flushes supported [ 4.987583] hda: hda1 [ 5.203643] hub 5-0:1.0: over-current change on port 4 [ 5.621738] hub 5-0:1.0: over-current change on port 6 [ 5.725729] hub 5-0:1.0: over-current change on port 8 [ 5.781726] scsi2 : SCSI emulation for USB Mass Storage devices [ 5.781726] usbcore: registered new interface driver usb-storage [ 5.781726] USB Mass Storage support registered. [ 5.781726] usb-storage: device found at 2 [ 5.781726] usb-storage: waiting for device to settle before scanning [ 5.885244] PM: Starting manual resume from disk [ 5.921911] kjournald starting. Commit interval 5 seconds [ 5.921911] EXT3-fs: mounted filesystem with ordered data mode. [ 6.073922] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 6.270772] usb 2-1: configuration #1 chosen from 1 choice [ 6.270772] usb 2-1: New USB device found, idVendor=15d9, idProduct=0a37 [ 6.270772] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.270772] usb 2-1: Product: USB Mouse [ 6.580639] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 6.724502] usb 3-1: configuration #1 chosen from 1 choice [ 6.724502] usb 3-1: New USB device found, idVendor=19d2, idProduct=0001 [ 6.724502] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.724502] usb 3-1: Product: ZTE CDMA Technologies MSM [ 6.724502] usb 3-1: Manufacturer: Qualcomm, Incorporated [ 7.388998] udevd version 125 started [ 8.066547] Linux agpgart interface v0.103 [ 8.068121] agpgart: Detected VIA P4M900 chipset [ 8.075184] agpgart: AGP aperture is 128M @ 0xf0000000 [ 8.093280] input: Power Button (FF) as /class/input/input1 [ 8.155998] ACPI: Power Button (FF) [PWRF] [ 8.156105] input: Sleep Button (CM) as /class/input/input2 [ 8.220103] ACPI: Sleep Button (CM) [SLPB] [ 8.220160] input: Power Button (CM) as /class/input/input3 [ 8.284315] ACPI: Power Button (CM) [PWRB] [ 8.507765] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.510263] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.677670] usbcore: registered new interface driver usbserial [ 8.677683] usbserial: USB Serial support registered for generic [ 8.677726] usbcore: registered new interface driver usbserial_generic [ 8.677728] usbserial: USB Serial Driver core [ 8.680985] usbcore: registered new interface driver hiddev [ 8.693582] input: USB Mouse as /class/input/input4 [ 8.696429] usbserial: USB Serial support registered for GSM modem (1-port) [ 8.747540] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:10.1-1 [ 8.747573] usbcore: registered new interface driver usbhid [ 8.747577] usbhid: v2.6:USB HID core driver [ 8.747946] option 3-1:1.0: GSM modem (1-port) converter detected [ 8.748012] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 8.748023] option 3-1:1.1: GSM modem (1-port) converter detected [ 8.748385] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 8.748396] option 3-1:1.2: GSM modem (1-port) converter detected [ 8.748429] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 8.748440] usbcore: registered new interface driver option [ 8.748442] option: USB Driver for GSM modems: v0.7.2 [ 8.806472] input: PC Speaker as /class/input/input5 [ 9.011711] parport_pc 00:06: reported by Plug and Play ACPI [ 9.011711] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 9.314185] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 9.314185] PCI: Setting latency timer of device 0000:80:01.0 to 64 [ 9.314185] PCI: Disallowing DAC for device 0000:80:01.0 [ 9.356002] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 10.232611] Adding 3004144k swap on /dev/sda3. Priority:-1 extents:1 across:3004144k [ 10.799387] EXT3 FS on sda2, internal journal [ 10.991241] loop: module loaded [ 11.178669] usb-storage: device scan complete [ 11.213964] scsi 2:0:0:0: Direct-Access WDC WD12 00BEVE-11UYT0 01.0 PQ: 0 ANSI: 0 [ 11.215445] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) [ 11.216312] sd 2:0:0:0: [sdb] Write Protect is off [ 11.216315] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 11.216318] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 11.217440] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) [ 11.218818] sd 2:0:0:0: [sdb] Write Protect is off [ 11.218822] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 11.218824] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 11.218899] sdb: sdb1 [ 11.219547] sd 2:0:0:0: [sdb] Attached SCSI disk [ 11.219592] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 16.007734] eth0: link down [ 18.595093] nvidia: module license 'NVIDIA' taints kernel. [ 18.849674] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24 [ 18.849685] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 18.850821] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun 4 23:43:17 PDT 2008 [ 34.620658] hda-intel: Invalid position buffer, using LPIB read method instead. [ 41.081863] CPU0 attaching NULL sched-domain. [ 41.081863] CPU1 attaching NULL sched-domain. [ 41.083230] CPU0 attaching sched-domain: [ 41.083234] domain 0: span 0-1 [ 41.083237] groups: 0 1 [ 41.083243] CPU1 attaching sched-domain: [ 41.083245] domain 0: span 0-1 [ 41.083248] groups: 1 0 [ 43.997189] NET: Registered protocol family 10 [ 43.997618] lo: Disabled Privacy Extensions [ 43.998065] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 162.307552] PPP generic driver version 2.4.2 [ 162.444517] PPP BSD Compression module registered [ 162.497426] PPP Deflate Compression module registered -------------------------------------- It worked before and I don't remember changing anything related to sound. Any idea? -- Regards,
Umarzuki Mochlis http://gameornot.net -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
