2008/11/26 Paul Cartwright <[EMAIL PROTECTED]>: > I didn't see anything... noticeable after the short test. Not sure I > understand all the tests.. do you need to unmount the partition for the long > test?
No you want to see the smart data on the disc, smartctl -d ata -a /dev/sd[0-9] Here is one from an old disc of mine, take note of line 5 and 9 :-) Adrian smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Fujitsu MPD and MPE series Device Model: FUJITSU MPD3084AT Serial Number: 01073642 Firmware Version: DD-03-47 User Capacity: 8,455,200,768 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 4 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Nov 26 07:02:32 2008 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Total time to complete Offline data collection: (2880) seconds. Offline data collection capabilities: (0x03) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. No Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. No General Purpose Logging support. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 001 032 Pre-fail Always In_the_past 260453 2 Throughput_Performance 0x0005 066 059 020 Pre-fail Offline - 136 3 Spin_Up_Time 0x0007 093 090 025 Pre-fail Always - 2 4 Start_Stop_Count 0x0012 096 096 016 Old_age Always - 2020 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 020 Pre-fail Always - 2327 8 Seek_Time_Performance 0x0005 080 080 019 Pre-fail Offline - 32 9 Power_On_Seconds 0x0012 001 001 020 Old_age Always FAILING_NOW 30486h+31m+41s 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 087 087 020 Old_age Always - 1979 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000b 100 080 020 Pre-fail Always - 1173 Warning: device does not support Error Logging Error SMART Error Log Read failed: Input/output error Smartctl: SMART Error Log Read Failed Warning: device does not support Self Test Logging Error SMART Error Self-Test Log Read failed: Input/output error Smartctl: SMART Self Test Log Read Failed Device does not support Selective Self Tests/Logging -- 24x7x365 != 24x7x52 Stupid or bad maths? <erno> hm. I've lost a machine.. literally _lost_. it responds to ping, it works completely, I just can't figure out where in my apartment it is. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
