I'm running lenny and I have a 22" CRT @ 1600x1200 as my left screen and
a 24" widescreen LCD @ 1920x1200 as my right screen.
When I boot up both screens come up at 1600x1200 and I have to run the
following command to fix them.
xrandr --output VGA-0 --mode 1600x1200_85 --pos 0x0 --output DVI-0
--mode 1920x1200_60 --pos 1600x0
here is my xorg.conf, I haven't tidied it up, there are a lot of things
commented out from my experimenting and from the evolution of the setup.
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "ati"
#Driver "radeonhd"
Option "Monitor-VGA-0" "L_CRT
Option "Monitor-DVI-0" "R_LCD"
#Option "DDCMode" "TRUE" #Force to use the modes queried from
the connected monitor. The default is off.
#Option "NoDDC" "TRUE" #Force ignore of DDC
#Option "IgnoreEDID" "TRUE" # Do not use EDID data for mode
validation, but DDC is still used for monitor detection.
#Option "PanelSize" "1360x768" #only use when driver cannot
detect correct LCD panel resolution, panels in funky sizes, will still
need modeline.
Option "EnablePageFlip" "TRUE" # page flipping for 3D accel,
increases performance but doesn't work in rare cases, hence default is off.
Option "AccelMethod" "EXA" # Valid options are XAA and EXA, XAA
old, reliable & default, EXA newer faster
Option "FBTexPercent" "50" # with EXA 0 may be faster but may
cause probs, XAA no real efect, default 50
Option "DMAForXv" "TRUE" # Default on speed up playing video
#Option "DepthBits" "16" # 16 or 24, for 3D defaults to screen
depth but can force a 16 on 24bit screen to speed up
Option "SubPixelOrder" "RGB" # change pixcel order read up
default NONE for crt RGB for most digital pannels.
Option "DynamicClocks" "TRUE" # may save power, may slow 3D,
don't know if it works on PCs, is for laptops
EndSection
Section "Monitor"
Identifier "L_CRT" # iiyama
Option "LeftOf" "R_LCD"
Option "DPMS"
#VendorName "Iiyama"
#ModelName "Iiyama A201HT, VisionMaster Pro 510"
#HorizSync 30.0-130.0
#VertRefresh 50.0-160.0
Modeline "1600x1200_75" 202.50 1600 1664 1856 2160 1200 1201
1204 1250 +hsync +vsync [EMAIL PROTECTED] Hz
Modeline "1600x1200_85" 229.50 1600 1664 1856 2160 1200 1201
1204 1250 +hsync +vsync # 85 Hz
#Option "TargetRefresh" "85"
Option "PreferredMode" "1600x1200_85"
EndSection
Section "Monitor"
Identifier "R_LCD" # Samsung
#Option "RightOf" "L_CRT"
Option "DPMS"
#VendorName "Samsung"
#ModelName "SyncMaster_2493HM"
#HorizSync 27.0 - 81.0 # From The Samsung Windows .ini file
#VertRefresh 50.0 - 75.0 # From The Samsung Windows .ini file
# Modline for Samsung SyncMaster_2493hm
Modeline "1920x1200_60" 154.128 1920 1968 2000 2080 1200
1203 1209 1235 +hsync -vsync # 60
#Option "TargetRefresh" "60"
Option "PreferredMode" "1920x1200_60"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "R_LCD"
DefaultDepth 24
SubSection "Display"
Depth 24
Virtual 3520 1200
EndSubSection
EndSection
So any idea how I can get it to boot strait to the correct resolution?
Thanks for any help.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
