I would like to use compiz. Unfortunately this is problematic since my system lags because of high (50%) cpu spikes. 3d acceleration is working. Is there anything I can do to solve this?
CPU > Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz Gfxcard > ATI Technologies Inc RV670PRO [Radeon HD 3850] xorg.conf > ### This file was generated by xac v0.6_pre3 > > Section "ServerLayout" > Identifier "XAC Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > ### Multiple FontPath entries are allowed (which are concatenated > ### together as well as specifying multiple comma-separated > ### entries in one FontPath command (or both methods) > ### > ### For X Font Server support, uncomment this and comment the > ### other FontPaths. (This is not required for most configurations) > # FontPath "unix/:-1" > > FontPath "/usr/share/fonts/misc" > FontPath "/usr/share/fonts/default/ghostscript" > FontPath "/usr/share/fonts/dejavu" > FontPath "/usr/share/fonts/75dpi" > FontPath "/usr/share/fonts/ttf-bitstream-vera" > FontPath "/usr/share/fonts/corefonts" > FontPath "/usr/share/fonts/100dpi" > FontPath "/usr/share/fonts/Type1" > EndSection > > Section "Module" > Load "extmod" > Load "dbe" > Load "record" > Load "glx" > Load "type1" > Load "freetype" > # Load "dri" > EndSection > > Section "ServerFlags" > Option "blank time" "10" # 10 Minutes > Option "standby time" "20" # 20 Minutes > Option "suspend time" "30" # 30Minutes > Option "off time" "60" # 60Minutes > ### Uncomment so X doesn't fail when no mouse is available > # Option "AllowMouseOpenFail" "true" > ### Enable this option if X should not change resolutions > ### This is useful if mode changing corrupts the X Server > # Option "DisableVidModeExtensions" "true" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > ### Check /usr/share/X11/xkb/rules/xorg.lst for available models > Option "XkbdModel" "pc105" > ### Check /usr/share/X11/xkb/symbols/ for available layouts > Option "XkbLayout" "us" > Option "XkbOptions" "compose:rwin" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Device" "/dev/input/mice" > Option "Protocol" "auto" > > ### Set driver options: > ### No options set! > > ### Unset driver options: > ### No options unset! > EndSection > > Section "Device" > Identifier "Card0" > Driver "fglrx" > ### Configured ATI Radeon Open Driver at PCI Bus ID: > # BusID "PCI:5:0:0" > EndSection > > Section "Monitor" > Identifier "Monitor0" > UseModes "Modes0" > ModelName "BenQ G2400W" > Option "DPMS" > Option "ReducedBlanking" > HorizSync 31-94 > VertRefresh 50-85 > EndSection > > Section "Modes" > Identifier "Modes0" > ### # 1920x1200 59.95 Hz (CVT 2.30MA-R) hsync: 74.04 kHz; pclk: 154.00 > MHz > Modeline "1920x1200" 154.00 1920 1968 2000 2080 1200 1203 1209 1235 > +hsync -vsync > ### # 720x400 59.55 Hz (CVT) hsync: 24.83 kHz; pclk: 22.25 MHz > Modeline "720x400" 22.25 720 744 808 896 400 403 413 417 -hsync > +vsync > ### # 256x341 59.09 Hz (CVT) hsync: 21.09 kHz; pclk: 6.75 MHz > Modeline "256x341" 6.75 256 264 288 320 341 344 354 357 -hsync > +vsync > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 24 > > SubSection "Display" > Depth 8 > Virtual 1920 1200 > Modes "1920x1200" "720x400" "640x480" "640x480" "800x600" "720x400" > "720x400" "640x480" "640x480" "800x600" "256x341" > EndSubSection > > SubSection "Display" > Depth 16 > Virtual 1920 1200 > Modes "1920x1200" "720x400" "640x480" "640x480" "800x600" "720x400" > "720x400" "640x480" "640x480" "800x600" "256x341" > EndSubSection > > SubSection "Display" > Depth 24 > Virtual 1920 1200 > Modes "1920x1200" "720x400" "640x480" "640x480" "800x600" "720x400" > "720x400" "640x480" "640x480" "800x600" "256x341" > EndSubSection > > EndSection > > Section "DRI" > Group 0 > Mode 0666 > EndSection > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
