Question teh other way: Has anybody the driver for the Cirrus Logic running under 2.6.26-1-686?
If so, how? Tankyou Bernd Am Samstag, 30. August 2008 schrieb Bernd Kloss: > Lenny > alsa-driver-1.0.17 > Kernel 2.6.26-1-686 > Cirrus Logic cs46xx > > Hello > > for the previous kernel 2.6.25-2-686 I could compile the audiodrivers > without problems. After kernel-update 2.6.26-1-686 I repeated the same > procedure without errors except the last step > modprobe snd-cs46xx > > Following errors are given back: > > WARNING: Error inserting snd_ac97_codec > (/lib/modules/2.6.26-1-686/kernel/sound/pci/ac97/snd-ac97-codec.ko): > Unknown symbol in module, or unknown parameter (see dmesg) > WARNING: Error inserting snd_ac97_codec > (/lib/modules/2.6.26-1-686/kernel/sound/pci/ac97/snd-ac97-codec.ko): > Unknown symbol in module, or unknown parameter (see dmesg) > FATAL: Error inserting snd_cs46xx > (/lib/modules/2.6.26-1-686/kernel/sound/pci/cs46xx/snd-cs46xx.ko): Unknown > symbol in module, or unknown parameter (see dmesg) > FATAL: Error running install command for snd_cs46xx > > > DMESG reports: > > [ *725.576042] snd_ac97_codec: Unknown symbol snd_verbose_printk > [ *725.636698] snd_ac97_codec: Unknown symbol snd_verbose_printk > [ *725.641998] snd_cs46xx: Unknown symbol snd_ac97_write_cache > [ *725.642113] snd_cs46xx: Unknown symbol snd_ac97_resume > [ *725.642533] snd_cs46xx: Unknown symbol snd_ac97_update_bits > [ *725.642585] snd_cs46xx: Unknown symbol snd_ac97_mixer > [ *725.642656] snd_cs46xx: Unknown symbol snd_ac97_bus > [ *725.642762] snd_cs46xx: Unknown symbol snd_verbose_printk > [ *725.642989] snd_cs46xx: Unknown symbol snd_ac97_suspend > [ *725.643912] snd_cs46xx: Unknown symbol snd_ac97_write > [ *725.643964] snd_cs46xx: Unknown symbol snd_ac97_read > > > In lib/modules/2.6.26-1-686/modules.dep no snd_* is found. > > No success with depmod -a 'uname -r', no further messages. > > In /lib/modules/2.6.26-1-686 there is a file > !build > but I cannot read it. > > What can I do to make my soundcard work with ALSA? > > > Thank you for helping > > Bernd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
