Hi debian list, I've just buy and installed debian lenny on "Dell Studio Hybrid" (http://www.dell.com/content/products/productdetails.aspx/desktop-studio-hybrid?c=us&cs=19&l=en&ref=dthp&s=dhs).
All seem good, except gnome/gdm. Here is a screenshoot of my problem : http://img397.imageshack.us/my.php?image=dsc00305xi8.jpg http://img397.imageshack.us/img397/1553/dsc00305xi8.jpg Who can help me ? I've created my xorg.conf with "Xorg -configure". Here it is : --- Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/etc/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "record" Load "extmod" Load "dri" Load "dbe" Load "glx" Load "xtrap" Load "GLcore" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" #DisplaySize 430 270 # mm Identifier "Monitor0" VendorName "SAM" ModelName "SyncMaster" ### Comment all HorizSync and VertRefresh values to use DDC: HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # <i> #Option "CacheLines" # <i> #Option "Dac6Bit" # [<bool>] #Option "DRI" # [<bool>] #Option "NoDDC" # [<bool>] #Option "ShowCache" # [<bool>] #Option "XvMCSurfaces" # <i> #Option "PageFlip" # [<bool>] Identifier "Card0" Driver "intel" VendorName "Intel Corporation" BoardName "Mobile GM965/GL960 Integrated Graphics Controller" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection --- Of course, I've tryed different resolutions, depthcolor and without HorizSync dans VertRefresh... without success... And here is my : /var/log/gdm/:0.log with an error (I don't understand why I have an error) : --- X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-3) Current Operating System: Linux Dell-Hybrid 2.6.24-1-amd64 #1 SMP Sat May 10 09:28:10 UTC 2008 x86_64 Build Date: 02 August 2008 10:07:22PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 15 21:55:12 2008 (==) Using config file: "/etc/X11/xorg.conf" (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found (II) Module "ddc" already built-in (II) Module "i2c" already built-in (II) Module "ramdac" already built-in (WW) intel(0): Failed to set up write-combining range (0xd0000000,0x10000000) Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list! Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! (EE) intel(0): First SDVO output reported failure to sync --- I've done a : "lspci -n" and submit it to : http://kmuto.jp/debian/hcl/index.cgi Here it's back: PCI ID Supporté? Fabricant Matériel Pilote Commentaire 80862a00 Yes Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub intel-agp v2.6.25 80862a01 - Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port 80862a02 Yes Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller intelfb v2.6.26 80862a03 Yes Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller intel 80862834 - Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 80862835 - Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 8086283a - Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 8086284b Yes Intel Corporation 82801H (ICH8 Family) HD Audio Controller snd-hda-intel v2.6.25 8086283f - Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 80862843 - Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 80862845 - Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 80862830 - Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 80862831 - Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 80862832 - Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 80862836 - Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 80862448 Yes Intel Corporation 82801 Mobile PCI Bridge i810_rng,hw_random 80862815 Yes Intel Corporation 82801HEM (ICH8M) LPC Interface Controller iTCO_wdt v2.6.25 80862850 Yes Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller piix v2.6.25 80862829 Yes Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller ahci v2.6.25 8086283e Yes Intel Corporation 82801H (ICH8 Family) SMBus Controller i2c-i801 v2.6.25 8086284f - Intel Corporation 82801H (ICH8 Family) Thermal Reporting Device 10ec8168 Yes Realtek Semiconductor Co., Ltd. High Definition Audio r8169 v2.6.25 197b2380 - JMicron Technologies, Inc. no information 14e44328 Yes Broadcom Corporation BCM4328 802.11a/b/g/n ssb v2.6.25 I've loaded correct modules, without success (and I've not verified /var/log/gdm/:0.log when I've done changes... but with our without these modules loaded, I alway have this strange "text"). Anyone have a tips ? Thanks, -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
