On Thu, Jul 24, 2008 at 04:35:59PM +0100, Rodolfo Medina wrote: >> When connecting to internet with a certain provider, I have problems with >> browsing. Then I want to fill the file /etc/resolv.conf with the proper dns >> servers but the file changes automatically during the connection being filled >> with values different from the ones I want. >> >> Googling around I experimented many possible solutions but none worked >> (e.g. edit the file /etc/network/interfaces or /etc/dhcp3/dhclient.conf). >> Even putting off the write permissions over resolv.conf did not work: it must >> be created every time. >> >> Does anyone have any experience about a real solution?
"Damon L. Chesser" <[EMAIL PROTECTED]> writes: > Rodolfo, > > I don't understand your issue. Are you using dhcp, you must be, and as > a result, your resolve.conf changes with input from the dhcp server. > Use static IP in /etc/network/interfaces, edit resolv.conf, you are > done. > > Here is a copy of my files: > > cat /etc/resolv.conf > domain damtek.org > search damtek.org > nameserver 68.87.68.162 > nameserver 68.87.74.162 > nameserver 192.168.200.1 > > cat /etc/network/interfaces > # This file describes the network interfaces available on your system > # and how to activate them. For more information, see interfaces(5). > > # The loopback network interface > auto lo > iface lo inet loopback > > # The primary network interface > auto eth0 > iface eth0 inet static > # address 192.168.200.15 > # netmask 255.255.255.0 > # network 192.168.200.0 > # broadcast 192.168.200.255 > # gateway 192.168.200.1 > # dns-* options are implemented by the resolvconf package, if installed > dns-nameservers 192.168.200.1 > dns-search damtek.org > address 192.168.200.15 > netmask 255.255.255.0 > gateway 192.168.200.1 > > > iface eth1 inet static > address 192.168.200.16 > netmask 255.255.255.0 > gateway 192.168.200.1 > > > My dns servers do not now change as a result. If you use dhcp (and have > to use it) then in my case the name servers are given to me by my > router/dns server which gets it from the ISP. I do not have resolveconf > package installed. Does this help? Thanks. My `/etc/network/interface' is very poor: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback . Now, suppose I want the following ppp connection log output: local IP address 151.82.24.152 remote IP address 10.6.6.6 primary DNS address 193.70.152.25 secondary DNS address 193.70.192.25 . In /etc/resolv.conf I suppose I have to put the lines: nameserver 193.70.152.25 nameserver 193.70.192.25 . How do you suggest I should edit /etc/network/interface? Thanks Rodolfo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
