-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 07/15/08 00:53, Kai Martens wrote:
> Hi there,
>
> While upgrading to service pack 3 windoze died - so I finally got my wife
> to work on my debian machine. Now I need to install debian on her amd64
> compaq, and unlike 15 month ago this time I cannot give up. The SATA
> drives are simply not recognized during installation. Threw in an old 8.6G
> ide hard drive that I had salvaged, and installed the system. Below is my
> dmesg output: the trail of the errors is clear, but even after a lot of
> googling I still have no idea as to what the root cause might be. Could
> not make sense of anything I found on the web. The chip is an ATI IXP 400.
> The BIOS does not seem to allow me to mess with any drive settings...
>
> :-(
>
> Thanks for your help!
>
> Best, Kai
>
> P.S. Due to the high traffic I am not on the list. Please cc me in your
> reply. - Will deal with the 8139too issue after I got the disk...
>
[snip]
> ata1: EH complete
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: configured for UDMA/100
> ata1: EH complete
[snip]
This is the best I could find from Google:
http://bbs.archlinux.org/viewtopic.php?pid=275504
- --
Ron Johnson, Jr.
Jefferson LA USA
"Kittens give Morbo gas. In lighter news, the city of New New
York is doomed."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkh8vtgACgkQS9HxQb37XmcxSQCePvRN0tpbkBuoP6f18rg4GaQ4
2bUAoOcwVwYTTZeupiG1vEIbQh7X6swI
=oh6p
-----END PGP SIGNATURE-----
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
