El vie, 09-05-2008 a las 12:21 -0700, francisco escribió: > El mié, 16-04-2008 a las 09:01 +0200, Sven Joachim escribió: > > On 2008-04-16 03:35 +0200, francisco wrote: > > > > > Hello > > > > > > Does somebody knows how to install the DWL-122 Wireless Adapter? > > > > Which revision is that? It should be printed on the packing, if you > > can't find it, run lsusb as root and post the results. > > > > debian:/home/user1# lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 003: ID 046d:c018 Logitech, Inc. > Bus 001 Device 001: ID 0000:0000 > > > > > I'm using testing-gnome, > > > > Kernel version would also be interesting. > > > > Linux debian 2.6.24-1-amd64 #1 SMP Fri Apr 18 23:08:22 UTC 2008 x86_64 > GNU/Linux > > > > and i did: > > > > > > 1. install linux-wlan-ng > > > 2. write wlancfg-"essid" > > > 3. load up modules # modprobe prism2_usb prism2_doreset=1 > > > 4. # wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable > > > 5. # wlanctl-ng wlan0 lnxreq_autojoin ssid=<your ssid> > > > authtype=opensystem > > > 6. configuration. > > > > > > But, the adapter doesn't work! > > > > For newer revisions of the adapter (rev. C1), make sure to install the > > firmware-ralink package from non-free. > > > > debian:/home/user1# dmesg | grep usb > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > usb usb1: configuration #1 chosen from 1 choice > usb 1-6: new low speed USB device using ohci_hcd and address 2 > usb 1-6: configuration #1 chosen from 1 choice > usbcore: registered new interface driver hiddev > input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on > usb-0000:00:0b.0-6 > usbcore: registered new interface driver usbhid > drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > usb 1-6: USB disconnect, address 2 > usb usb2: configuration #1 chosen from 1 choice > usb 1-6: new low speed USB device using ohci_hcd and address 3 > usb 1-6: configuration #1 chosen from 1 choice > input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on > usb-0000:00:0b.0-6 > usb 1-3: new full speed USB device using ohci_hcd and address 4 > usb 1-3: device descriptor read/64, error -62 > usb 1-3: device descriptor read/64, error -62 > usb 1-3: new full speed USB device using ohci_hcd and address 5 > usb 1-3: device descriptor read/64, error -62 > usb 1-3: device descriptor read/64, error -62 > usb 1-3: new full speed USB device using ohci_hcd and address 6 > usb 1-3: device not accepting address 6, error -62 > usb 1-3: new full speed USB device using ohci_hcd and address 7 > usb 1-3: device not accepting address 7, error -62 > > > Sven > > > >
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
