On 02-05-2008, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Am 02.05.2008 um 14:09 schrieb Sylvain Le Gall: >> On 02-05-2008, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: >>> Am 02.05.2008 um 11:01 schrieb Sylvain Le Gall: >>>> The solution is to upgrade your kernel to at least 2.6.22.6, to >>>> have the >>>> working r8169 kernel module. >>> >>> I've been seeing different comments on this list recently regarding >>> mixing >>> stable with testing or unstable or backports etc. Generally this >>> should be >>> avoided. Would this mean, since I need a newer kernel than the one in >>> etch >>> stable, that I should not run Etch stable but go for lenny or sid >>> instead? >> >> You have 2 solutions: >> - use r1000 (a driver from realtek for this card) with kernel >> 2.6.18 in >> etch > > For anyone else looking for this (Realtek's website is a bit > disorganised > and searching for the driver on it took me a while), here's the link: > ><http://www.realtek.com.tw/downloads/downloadsView.aspx? > Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false> >
Errm... No this one doesn't work (well) because of misaligned data structure. You will have a lot of packet miss after several hours of uptime. Better use: http://fr.kontron.com/_etc/scripts/download/getdownload.php?downloadId=NTYyMQ== which is a corrected version of the link above. > > Now I'm researching which case to get. Ideally I want a tiny one but > which allows two or more 2,5" HDDs in it. (Perhaps I later also want to > install a TV (DVB-T) card in it, too.) So far I haven't found a good > one. > http://www.serener.com/ (preferred) http://www.mini-box.com/s.nl/sc.8/category.87/.f Regards, Sylvain Le Gall -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
