Hi guys,
I have two identical Intel 100mbit NICs in my workstation. For some
reason, the first one loads with the e100 driver, but the second just
doesn't show. The only way I've managed to get around this is to load
the eepro100 driver too.
00:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 0c)
Subsystem: Intel Corporation EtherExpress PRO/100 S Desktop Adapter
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at fb800000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 9800 [size=64]
Memory at fb700000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at fb600000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Kernel driver in use: e100
Kernel modules: e100, eepro100
00:0d.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 0c)
Subsystem: Intel Corporation EtherExpress PRO/100 S Desktop Adapter
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at fbb00000 (32-bit, non-prefetchable) [size=4K]
I/O ports at a000 [size=64]
Memory at fba00000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at fb900000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Kernel driver in use: eepro100
Kernel modules: e100, eepro100
Has anybody seen this? Is there some options I have to pass to e100 to
make it see both cards?
One thing I have noticed:
eth1: Invalid EEPROM checksum 0xfabb, check settings before activating
this device!
eth1: 0000:00:0d.0, 00:0e:0c:c4:27:af, IRQ 17.
Could this be why e100 won't activate it? It doesn't print any errors
to the effect. How do I fix this under linux?
Thanks
--kj
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
