Hi All,

I'm trying to move to kernel 2.6.24 and the new iwl3945 drivers.  I've
uninstalled the old ipw3945 modules and daemons, and followed all the
steps described here http://wiki.debian.org/iwlwifi, but I still can't
connect to my router.  The errors I see are:

Apr  1 19:11:56 nibbler dhclient: wmaster0: unknown hardware address
type 801
Apr  1 19:11:56 nibbler dhclient: Listening on
LPF/wlan0/00:18:de:11:ec:08
Apr  1 19:11:56 nibbler dhclient: Sending on
LPF/wlan0/00:18:de:11:ec:08
Apr  1 19:11:56 nibbler dhclient: Sending on   Socket/fallback
Apr  1 19:11:56 nibbler dhclient: receive_packet failed on wlan0:
Network is down

ifconfig shows the proper devices:

wlan0     Link encap:Ethernet  HWaddr 00:18:de:11:ec:08  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wmaster0  Link encap:UNSPEC  HWaddr
00-18-DE-11-EC-08-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

my /etc/udev/rules.d/z25_persistent-net.rules contains:

# PCI device 10ec:8169 (r8169)
SUBSYSTEM=="net", DRIVERS=="?*", SYSFS{address}=="00:17:31:b5:2e:c8",
NAME="eth0"

# FireWire host adapter 00e01800035a8648 (/class/net/eth1)
SUBSYSTEM=="net", DRIVERS=="?*",
SYSFS{address}=="00:e0:18:00:03:5a:86:48", NAME="eth1"

# PCI device 0x8086:0x4222 (iwl3945)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:18:de:11:ec:08",
ATTR{type}=="1", NAME="wlan0"

And /etc/network/interfaces has:

iface wlan0 inet dhcp
  pre-up ip link set wlan0 up
  wireless_essid mynetwork

iface eth0 inet dhcp

iface lo inet loopback

auto lo


Is there some other configuration I'm missing?  Thanks in advance,
David



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to