When I run the "sensors" command, I get:
[EMAIL PROTECTED]:~$ sensors
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.44 V (min = +0.00 V, max = +3.84 V)
+12V: +12.40 V (min = +5.84 V, max = +0.00 V)
+3.3V: +3.39 V (min = +0.10 V, max = +3.23 V)
+5V: +5.04 V (min = +2.59 V, max = +0.11 V)
-12V: +1.70 V (min = -13.76 V, max = -14.91 V)
V5SB: +5.05 V (min = +0.27 V, max = +3.44 V)
VBat: +0.16 V (min = +0.59 V, max = +3.20 V)
fan1: 0 RPM (min = 164 RPM, div = 128)
CPU Fan: 1854 RPM (min = -1 RPM, div = 4)
fan3: 0 RPM (min = 131 RPM, div = 128)
M/B Temp: +28.0°C (high = +16.0°C, hyst = +10.0°C) sensor =
thermistor
CPU Temp: +30.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
temp3: -48.0°C (high = +80.0°C, hyst = +75.0°C) sensor =
thermistor
cpu0_vid: +1.388 V
beep_enable:enabled
Are these values reasonable, or is there something wrong with the
"lm-sensors" configuration? I am especially wondering about the
values for "-12V", "VBat", "V5SB" (don't know what this is), and
"temp3". Also, my box has 3 fans (PSU fan, CPU fan, case fan) and
they all turn, but sensors says only one is turning. Anyone knows
a good tutorial about setting up sensors?
Regards, Jan
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
