I have seen/used a couple different ways to setup Ethernet bonding and
subsequently 802.1q vlans on top of the bond. Just curious if anyone
knows the "Debian" way of doing this? Right now I use entries in
/etc/modules
8021q
/etc/modprobe.d/arch/i386
alias bond0 bonding
options bond0 mode=1 miimon=100 primary=eth0
/etc/network/interfaces
auto bond0
iface bond0 inet static
address 192.168.0.77
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
up /sbin/ifenslave bond0 eth1 eth0
auto bond0.20
iface bond0.20 inet static
address 192.168.1.77
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
pre-up /sbin/vconfig add bond0 20
but I am always open to other ideas. More importantly I like to stay in
the Debian mold as I can for supportability and to avoid surprises
during upgrades. If there is a Debian supported method of accomplishing
the same thing please share.
Thanks.
-rh
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
