> ifconfig wlan0 up > iwconfig wlan0 mode managed > iwconfig wlan0 essid ******* > iwpriv wlan0 set AuthMode=WPA2PSK > iwpriv wlan0 set WPAPSK= ************* > iwpriv wlan0 set EncrypType=AES > dhclient
hi rob, sorry but it did not help. When i run wifi-radar i get the messages: Error for wireless request "Set Frequency" (8B04) : SET failed on device ath0 ; Invalid argument. Stale pid file. Removing Internet Systems Consortium DHCP Client V3.0.4 Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wifi0: unknown hardware address type 801 wifi0: unknown hardware address type 801 Listening on LPF/ath0/00:16:e3:17:c0:c7 Sending on LPF/ath0/00:16:e3:17:c0:c7 Sending on Socket/fallback DHCPREQUEST on ath0 to 255.255.255.255 port 67 DHCPREQUEST on ath0 to 255.255.255.255 port 67 DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 14 I just found the wifi-radar.conf an paste here [DEFAULT] ifup_required = False auto_profile_order = xxxxxxx speak_up = False scan_timeout = 5 interface = ath0 commit_required = False [xxxxxxx] prescript = use_wpa = no postscript = mode = Managed key = 94722934517829456543324697 use_dhcp = yes security = open wpa_driver = madwifi channel = auto Any idea more ??? Thanx -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
