Dear Edward, i thank you or your answer. I just add two lines to tell you what conscol ALt-f3 says as i try to install my pCmcia networ card. I start a few lines before that moment:
Kernel and module install was successul moving away /lib/modules to /lib/modules.old making /lib/modules a link to /target/lib/modules No /var/run/cardmgr.pid, cardmgr not needing to be stopped rmmod: module ds is not loaded rmmod: module i82365 is not loaded rmmod: module pcmcia_core is not loaded Starting 'cardmgr' Starting versionis 3.1.33 watching 2 socket unsupported card in socket 1 (says the same even if i plug it in socket 0) product info: "Couperless pcmCIA "100base" manfid 0xffff 0x1090 function: 6 (network) Starting pid 58, console /dev/tty2: -/bin/sh That's all. I hope you would like to comment this output Thanks in advance Regards Maurizio Gatto > > * maurizio gatto [Mon, Aug 04 2003, 10:55:22AM]: > > 4) when program modconf runs, i tried to conigure pCMCIA support, > > choosing controller i82365, and giving no further option to kernel. But i > > guess that here i failed because i got from PC firstly a high sound and > > then a low sound. > > It means that cardmgr started and tried to load a driver for the > detected card but failed. For details, look on other console screen > (Alt-F3, Alt-F4). > > > 5) Afterwards i attepted to configure the device driver module for my > > card (which should be axnet_cs) but unfortunatly i didn't find it in the > > list. > > You should not, cardmgr manages it for you. > > MfG, > Eduard. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
