On Fri, Jan 25, 2008 at 04:47:53PM +0100, Thierry Chatelet wrote: > On Friday 25 January 2008 10:49, Thierry Chatelet wrote: > > > I get no error on mount command. If I mount it manually, then I have > > something in /media/cdrom0, but ithe cd is shown by kde as a blank cd, and > > I can't open it in Konqueror (see above). If I put a audio cd, or any type > > of cd it shows as blank. I put the cd drive on another box, it works fine, > > I tried an other cd drive on this box, changing the cable as well: same > > problem. The cds I tried are ok on the other box. > > Well looking at what I wrote, it looks like a problem on kde/konqueror. > > Also I had to install an other box with Etch 4.0r2, and I have the same > > problem!!! Thierry > > Well, adding to the puzzle: I put the hard-drive and cd-drive on an other > box, > then everything is fine!! So one would say something is wrong with the first > box. But, if I boot with a install-cd on it, everything is fine, until I > start kde. And as said before, if I manually mount the cd, it appears ok > in /media/cdrom0. > As I have to deliver the box tomorrow, if anyone has a idea where to look for > a clue, I will be glad...
So, with no KDE running, you can mount the CD in /media/cdrom0, and read the contents. If you then start up Konqueror and navigate to /media/cdrom0, you don't see any files. If you leave Konqueror running and go to a shell, cd to /media/cdrom0 and do an ls -al, what do you get? Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
