I think that you need to have framebuffer support for your video card compiled into the kernel to get the penguin to show up after lilo loads the second-stage bootloader. I'm not sure what other options need to be set.
With the 2.6.0-test1 kernel, I found an odd issue where my ethernet card (An RTL-8139C, using the RTL-8139 driver) fails to receive packets (although sending is fine) if ACPI is enabled. So I can help you even less with ACPI. :-( Good luck! ~Tom White --------------------------------------------- http://www.oddquad.org/ --------------------------------------------- It is equally bad when one speeds on the guest unwilling to go, and when he holds back one who is hastening. Rather one should befriend the guest who is there, but speed him when he wishes. -- Homer, "The Odyssey" [Quoted in "VMS Internals and Data Structures", V4.4, when referring to scheduling.] On Sun, 27 Jul 2003, Marino Fernandez wrote: > Date: Sun, 27 Jul 2003 22:27:43 -0500 > From: Marino Fernandez <[EMAIL PROTECTED]> > To: Debian User List <[EMAIL PROTECTED]> > Subject: Kernel 2.6.0-test2 minor issues. Works well!!! > Resent-Date: Sun, 27 Jul 2003 22:28:00 -0500 (CDT) > Resent-From: [EMAIL PROTECTED] > > I've just compiled this kernel, and I am running with it. Some issues I had > before with test1 are gone (for example I was unable to unmount my ethernet > card upon reboot). > > I have to say that everything seem to be working well, that ACPI seem to work > (although no thermal monitoring in my machine). My PCMCIA and USB port seem > to be working OK. > > I just have 2 issues: > > 1) I have not been able to enable the linux (Tux) logo during the initial > bootup, except in monochomatic (an it is very ugly). Anybody know how to > enable this (the little penguin on the left upper corner during boot).... As > you see not a life or death issue. > > 2) The second issue is that, KLaptop lets you configure ACPI, and to enable > Standby, Suspend and Hibernate (suspend to disk). But apparently you have to > enter a comand in a little dialog box. Does anybody knows were can I find > them... or just tell me. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
