Hi,
I'm a bit of a wireless newbie. I'm trying to connect my tnet1130 PCI
wifi card (104c:9066) with the ndiswrapper to a Asus WL-500GP access point.
I've got the ndiswrapper going, using Debian Etch, kernel 2.6.18-5-686,
and building the ndiswrapper-modules-2.6.18-5-686 package, version
1.28-1+2.6.18.dfsg.1-13etch4.
I'm testing wpa_supplicant with a config file:
~$ cat /etc/wpa_supplicant/test.conf
eapol_version=1
ap_scan=1
network={
ssid="goose"
scan_ssid=1
proto=WPA
key_mgmt=WPA-PSK
psk="test1232"
}
However it seems to repeatedly disconnect after it succeeds associating,
where it says 'CTRL-EVENT-DISCONNECTED':
~$ sudo wpa_supplicant -c /etc/wpa_supplicant/test.conf -i wlan0 -D wext -d
Initializing interface 'wlan0' conf '/etc/wpa_supplicant/test.conf'
driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/test.conf' ->
'/etc/wpa_supplicant/test.conf'
Reading configuration file '/etc/wpa_supplicant/test.conf'
eapol_version=1
ap_scan=1
Priority group 0
id=0 ssid='goose'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=20 WE(source)=18 enc_capa=0x5
capabilities: key_mgmt 0x5 enc 0x7
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:00:8c:00:40:39
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=5):
67 6f 6f 73 65 goose
Trying to get current scan results first without requesting a new scan
to speed up initial association
Received 260 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:1b:fc:45:28:5c ssid='goose' wpa_ie_len=30 rsn_ie_len=0 caps=0x11
selected based on WPA IE
Trying to associate with 00:1b:fc:45:28:5c (SSID='goose' freq=2412 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2
02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=14
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:1b:fc:45:28:5c into blacklist
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8c07 len=55
AssocReq IE wireless event - hexdump(len=47): 00 05 67 6f 6f 73 65 01 04
82 84 8b 96 32 08 0c 12 18 24 30 48 60 6c dd 16 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8c08 len=32
AssocResp IE wireless event - hexdump(len=24): 01 08 82 84 8b 96 24 30
48 6c 32 04 0c 12 18 60 dd 06 00 10 18 02 00 f0
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:1b:fc:45:28:5c
Association info event
req_ies - hexdump(len=47): 00 05 67 6f 6f 73 65 01 04 82 84 8b 96 32 08
0c 12 18 24 30 48 60 6c dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50
f2 02 01 00 00 50 f2 02
resp_ies - hexdump(len=24): 01 08 82 84 8b 96 24 30 48 6c 32 04 0c 12 18
60 dd 06 00 10 18 02 00 f0
WPA: set own WPA/RSN IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
State: SCANNING -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:1b:fc:45:28:5c
No keys have been configured - skip key clearing
Network configuration found for the current AP
WPA: Using WPA IE from AssocReq to set cipher suites
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Associated with 00:1b:fc:45:28:5c
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Setting scan request: 0 sec 100000 usec
BSSID 00:1b:fc:45:28:5c blacklist count incremented to 2
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
State: ASSOCIATED -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=5):
67 6f 6f 73 65 goose
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: SCANNING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing
WEXT: Operstate: linkmode=0, operstate=6
Removed BSSID 00:1b:fc:45:28:5c from blacklist (clear)
Cancelling scan request
I don't really know how to debug this further. Has anyone got any pointers?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
