On Oct 17, 6:30 am, Dancing Fingers <[EMAIL PROTECTED]> wrote: > On Oct 17, 3:50 am, Sjoerd Hardeman <[EMAIL PROTECTED]> > wrote: > > > > > Andrew Sackville-West schreef: > > > > On Tue, Oct 16, 2007 at 08:43:44AM -0700, Dancing Fingers wrote: > > > >> On Oct 16, 10:40 am, Andrew Sackville-West > > >> <[EMAIL PROTECTED]> wrote: > > > >>> On Tue, Oct 16, 2007 at 06:15:50AM -0700, Dancing Fingers wrote: > > > >>>> Hi guys, > > >>>> I have an dual-head ATI AGP card that I had working great on my AMD64 > > >>>> box, except for a square mouse one side (which I could live with. But > > >>>> I wanted to view Flash stuff which isn't supported in AMD64 yet so I > > >>>> put the card in my Athlon box. I copied over the same xorg.conf file > > >>>> but all I get is 2 views of the same thing. > > >>>> Any ideas? > > > >>> ummm... you could provide useful stuff like xorg.conf and maybe a copy > > >>> of /var/log/Xorg.0.log. > > > >> Sorry, this is xorg.conf: > > > > To my weak eyes, this all looks relatively okay, and I'm not familiar > > > with your card or the ati driver, but I see one thing that *might* > > > point to the problem: > > > >> Section "Device" > > >> Identifier "0 ATI Technologies Inc RV350 AS [Radeon 9550]" > > >> Driver "ati" > > >> BusID "PCI:1:0:0" > > >> Screen 0 > > >> Option "DDCMode" "True" > > >> Option "MonitorLayout" "primary monitor,secondary monitor" > > >> EndSection > > > >> Section "Device" > > >> Identifier "1 ATI Technologies Inc RV350 AS [Radeon 9550]" > > >> Driver "ati" > > >> BusID "PCI:1:0:0" > > >> Screen 1 > > >> #Option "DDCMode" "True" > > >> #Option "MonitorLayout" "primary monitor,secondary monitor" > > >> EndSection > > > > you've given the two outputs the same BusID (which makes sense as its > > > one card, right?) but... > > > > snipped from Xorg.0.log > > > >> (II) Primary Device is: PCI 01:00:0 > > >> (II) ATI: Candidate "Device" section "0 ATI Technologies Inc RV350 AS > > >> [Radeon 9550]". > > >> (II) ATI: Candidate "Device" section "1 ATI Technologies Inc RV350 AS > > >> [Radeon 9550]". > > >> (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) > > >> found > > > > seems to suggest that the other output *may* be on a different > > > BusID. This may be a difference between the two architectures. A look > > > at lspci would help. it may be that in AMD64 the card shows up as one > > > device and in the athlon it shows up as two. > > > > that's my .02 > > > > A > > > On my Athlon box this is the case. Although it is just one card, it has > > two BusID's. Changing that will probably solve your problem. > > > Sjoerd > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > I tried changing the bus id's on both heads without luck. The curious > thing is that if I Gnome Control Center>>Screen Resolution it will > pop up: > The X Server does not support the XRandR extension. Runtime > resolution changes to the display size are not available. > Thanks for the help. > Chris > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Eureka, I found it! All I had to do was aticonfig --initial=dual-head on the command line. Hope this helps someone else. Chris -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
