On Tue, Oct 16, 2007 at 10:19:25AM +0200, Dr. Harry Knitter wrote: > Mailing Lists wrote: > > > On 10/15/07, Dr. Harry Knitter <[EMAIL PROTECTED]> wrote: > >> hello, > >> > >> my problem is that my scanner (Mustek BearPaw TA 2448 Pro) is not shown > >> as device e.g. /dev/usb/scanner0 or /dev/usbscanner0. > >> I already had it working once. However, now not even the device appears > >> in /dev anymore. > >> How can I get it back? > >> I?m working with debian etch. > > > > Have you read /usr/share/doc/libsane/README.linux.gz? This part seems > > relevant: > > > > I seems not to be a sane problem. As I have already told no usb scanner > device is present. Therefore sane cannot find a scanner. > on the other hand I already had the scanner running. However, now it is not > present anymore as a device in /dev or /dev/usb respectivly.
were you on a fully up-to-date etch when it was working previously? What have you changed on your system between the time it was working and now? the /dev for the scanner should be created by udev. you could try running udev-trigger and see if it shows up then. probably watch syslog at the same time. also, watch syslog (tail -f /var/log/syslog) while you unplug and replug the scanner. You should see some activity. posting the relevant results would be helpful. A
signature.asc
Description: Digital signature
