On 8/14/07, Jude DaShiell <[EMAIL PROTECTED]> wrote: > > Oh, I know how to make that happen. Just put the dsl or router's > configuration address in the /etc/resolv.conf file as the search domain > and clear out the servers in that file. Could be your router or modem was > told by your provider or manufacturer that it needs a firmware update. > Another possibility may be a malware. If the second is the case try > downloading the dban iso file with another computer and burning it on a cd > that can be burnt only once. When you put the cd in, a boot: prompt comes > up so type autonuke <cr> and if you have a 300GB hard drive expect dban to > take a day to restore it to the state it was in before the first operating > system was put on it. http://dban.sf.net is the url. A guess on my part > is 192.168.1.1 will get you to your modem or router manufacturer's web > page for configuration. If you had to use another address to do this, try > it. If it doesn't work, you got a malware and need dban. You if you're > using a dsl modem also need something like a westel 227W set up correctly > so when you check with grc.com's shields up you're told you're truely > stealthed. > > > > On Tue, 14 Aug 2007, Michael Habashy wrote: > > > Hi -i got a crazy connectivity issue on my hands. > > THis machine was running fine for about a month or so --then i lost > > connectivity. > > I have no errors to tell me what is going on. > > i have switched the built-in nic on the motherboard and the hub ports > > --there are other devices that working fine. > > I have disabled a lot of services..and trying to get bear vinalla as > > possible. > > I can not ping to any other host..then just my local interface. > > THe last things done were to install courier-imap and courier-ssl. > > i was sending an email to the box..and bam..there is notthing there.. > > > > the interfaces initialize just fine..but do not talk to anythhign...i > have > > apache and other apps running..and their ports are open..just not > talking to > > anyone outside the box...and yes..there is no iptables or ipchains.. > > I am running out of options..and do not want to rebuild box...so > help!!!!!! > > here are the ifconfig and netstat: > > > > > > eth0 Link encap:Ethernet HWaddr 00:E0:81:74:60:6A > > inet addr:192.168.2.22 Bcast:192.168.2.255 Mask:255.255.255.0 > > inet6 addr: fe80::2e0:81ff:fe74:606a/64 Scope:Link > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > RX packets:86 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:1000 > > RX bytes:6985 (6.8 KiB) TX bytes:9962 (9.7 KiB) > > Interrupt:50 > > > > eth1 Link encap:Ethernet HWaddr 00:E0:81:74:60:6B > > inet addr:192.168.2.12 Bcast:192.168.2.255 Mask:255.255.255.0 > > UP BROADCAST MULTICAST MTU:1500 Metric:1 > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:1000 > > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > > Interrupt:58 Base address:0x2000 > > > > lo Link encap:Local Loopback > > inet addr:127.0.0.1 Mask:255.0.0.0 > > inet6 addr: ::1/128 Scope:Host > > UP LOOPBACK RUNNING MTU:16436 Metric:1 > > RX packets:139 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:139 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:0 > > RX bytes:10919 (10.6 KiB) TX bytes:10919 (10.6 KiB) > > > > sit0 Link encap:IPv6-in-IPv4 > > NOARP MTU:1480 Metric:1 > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:0 > > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > > > > Kernel IP routing table > > Destination Gateway Genmask Flags MSS Window irtt > > Iface > > 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 > > eth0 > > 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 > > eth1 > > 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 > > eth1 > > 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 > > eth0 > > >
thanks for the reply - I am getting a really crazy situation now... 1. when i reboot the server, i can not ping to anyone. 2. when i go to the gui -opendesktop --and i click on the network applete, and deactivate the adapter and activate ---I am able to ping on my local network. 3. i can not ping past the my default gateway ---i double checked the default gateway settings they are correct standard 192.168.2.1 4. i have the info in resolv.conf...i can not get out to the dns servers that are past my router. very strange..and bizare affects..anyone can help..would appriciate it. thanks mjh
