-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Dear users,
since i moved from 2.6.18 to 2.6.22 my wlan interface stopped working. At boot-time my hotplug system (no udev is installed! - because this is not wanted) detects the ipw2100 card and tries to load the ipw2100 module. this task is timing out (after the 60seconds in /sys/class/firmware/timeout). there is no change if i increase this timeout to 100secs or more. the error message in the kernel-ringbuffer is: ipw2100: Detected Intel PRO/Wireless 2100 Network Connection ipw2100: eth1: Firmware 'ipw2100-1.3.fw' not available or load failed. ipw2100: eth1: ipw2100_get_firmware failed: -2 ipw2100: eth1: Failed to power on the adapter. ipw2100: eth1: Failed to start the firmware. ipw2100Error calling register_netdev. ACPI: PCI interrupt for device 0000:02:02.0 disabled ipw2100: probe of 0000:02:02.0 failed with error -5 The firmware is present in /lib/firmware as well as in /usr/local/lib/firmware/ my wlan interface is ... attached to a ibm thinkpad t40: 02:02.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04) any help is greatly appreciated best regards stefan -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (MingW32) iD8DBQFGtaloA2RuWqH7QvoRCillAJ9YnJI0jmoEEHqcgJ8POvJRJbh3IgCcCftA 3RhkFeAXW4NJWp/GZ4Zra/Y= =yMBC -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
