-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Chaim Keren Tzion escreveu: > Hi, > > I have been trying to set up a software RAID1 system with two 320GB > SATA disks. > > I have followed the instructions at both these links below (using > lenny instead of etch because of what seems to be unsupported > hardware in the older kernel): > http://ads.wars-nicht.de/blog/archives/54-Install-Debian-Etch-on-a-Software-Raid-1-with-S-ATA-disks.html > and > http://www.networkjack.info/blog/2007/01/03/debian-linux-etch-software-raid-1/ > > > I had issues with both procedures. 1. Both of them failed when I > chose to install the "Standard system" item in the tasksel stage of > the install. > > 2. When I chose to not install the "Standard system" I A) got a > minimalistic system which uses lilo(yuck) as a boot loader B) The > RAID1 MD device that I created for the /boot partition exists but > was not added to the /etc/fstab, no files were written to that > device/partition and the system actually boots from the root MD > device instead. > > 3) The second URL above uses LVM which I wouldn't have used > otherwise but I was desperate to finally get the RAID to work and > followed the instructions exactly. Is LVM any type of requirement > for a software RAID system? > > The system works but everything is on the root MD device. Any > ideas/pointers on how to do it right? 1. I preffer Grub 2. Would > like to boot off the first MD device/partition 3. I preffer not > using LVM 4. I would like to have the "Standard system" packages > install. > >
Hi, Sincerely, I do not want more to know of RAID-1 saw software, I had many problems, mainly because of boot that in the truth never the record existed in both. In a server in production, valley to buy a controller raid and only to stop to lose time with this type of thing. thx, Márcio -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) iD8DBQFGqJdpbjyCr4Ixg0wRAq8GAKCRt6KGDU6rMihIF8csW9odcHYLGQCgpbWv 5fX6ZgBX4c/kT2UpKJCO6c4= =uK34 -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
