Hello,..

im using debian SID (64 bit) on Acer 5102.
using bcm4318 wifi card.
kernel 2.6.21-2-amd64.

since i noticed that my local AP started to collected data about my serf
i guesed it is time to play with MAC masquerade.

i have compiled the madwifi module .
and loaded it.
i installed bcm43xx-fwcutter with the firmware

Code:

apt-get install bcm43xx-fuxtter


Code:

m-a -> choose -> madwifi get / build / install


then i read some man s
Code:

man ifconfig



then:
Code:

ifconfig eth1 hw ether 0a:b0:03:23:45:22

to set a fake MAC addres.
then dhclient eth1 but ..
Code:

Internet Systems Consortium DHCP Client V3.0.5 Copyright 2004-2006
Internet Systems Consortium. All rights reserved. For info, please visit
http://www.isc.org/sw/dhcp/ Listening on LPF/eth1/0a:b0:03:23:45:22
Sending on LPF/eth1/0a:b0:03:23:45:22 Sending on Socket/fallback
DHCPREQUEST on eth1 to 255.255.255.255 port 67 DHCPREQUEST on eth1 to
255.255.255.255 port 67 DHCPREQUEST on eth1 to 255.255.255.255 port 67
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER
on eth1 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth1 to
255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth1 to
255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth1 to
255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth1 to
255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth1 to
255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth1 to
255.255.255.255 port 67 interval 3 No DHCPOFFERS received.


so i thought that mac was bad so i reload it (modprobe -r bcm43xx
modprobe bcm43xx)

and set to using the same MAC as the real mac.
and again the same (No DHCPOFFERS receive.).

P.s.
i was able to do iwlist eth1 scan (returend results);
i am able to connect to the same AP without changing the MAC.
what am i doing wrong ?

-- 
--
Could you at least use man ?
        Jabka Atu (aka mha13/Mashrom Head)
--


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to