Hi Gilles
Thank you
I install ethtool but it still has problem to force the card.
How can I put it in the boot up? /etc/network/interface
Thank you
~# ethtool -s eth7 speed 1000 duplex full autoneg off
~# ethtool -a eth7
Pause parameters for eth7:
Autonegotiate: on
RX: on
TX: on
Gilles Mocellin <[EMAIL PROTECTED]> wrote: Le Thursday 07 June 2007 19:42:12
chloe K, vous avez écrit :
> Hi all
>
> How do I force the NIC to 1000M full duplex
>
> it seems that it can't do it in mii-tool?
>
> /etc/network# mii-tool -F 1000baseTx-FD eth7
> Invalid media specification '1000baseTx-FD'.
I think that gigabit cards are always full duplex.
But mii-tool has some problems with some drivers (tg3).
Use ethtool as suggested by Juergen Fiedler.
You can also look at the parameters you can give to your driver.
# modinfo yourmodule
---------------------------------
Be smarter than spam. See how smart SpamGuard is at giving junk email the boot
with the All-new Yahoo! Mail
