I'm using 3.0r0 (2.4.18-bf2.4 kernel) with ASRock K7VT2 m/board and Maxtor 30GB ATA133 hard disk.Above was running as root. The hdparm -c and -m flags do what they are supposed to,
I tried switching on DMA using hdparm -d1 /dev/hda but got the following error message:
HDIO_SET_DMA failed: Operation not permitted
it's just the -d1 that I can't get to work.
I have an identical disk with Red Hat 8.0 (2.4.18-14 kernel) and DMA works without a problem
on this. Disk read speed as tested by hdparm is around 49MB/sec with DMA and 7MB/sec without.
Anyone know how I can enable DMA on the 3.0r0 system?
/var/log/messages reports `VP_IDE: Unknown VIA Southbridge' in 3.0r0,
and `VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1' in Red Hat 8.0
It looks to me like there's a driver missing in 3.0r0 (or existing driver is incompatible).
Can anyone confirm this and/or suggest a workaround?
_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
