I purchased a GeForce4 MX440 AGP8x 128Mb DDR VIVO DVI VGA card. There have been some postings regarding installation of the nvidia driver for this board. I followed these, and thought Rob Weir's help back in April would give me all the guidance needed.
I run Woody, and felt it best to get the card working with the 'vesa' driver first, then switch to the 'nvidia' one (I don't want to go to X4.2 so can't try the 'nv' driver). After installing discover, mdetect and read-edid (as indicated by Joey Hess), I ran 'dpkg-reconfigure xserver-xfree86' 'Startx' opened a screen (even showing the login panel), but then aborted. The error messages refer to the mouse and configuration I did not include (maybe came from 'mdetect'). I did a little googling, and it seems they may be because I have an optical PS/2 wheel mouse. I have another box also with the same type of mouse and the XF86Config-4 file on that is identical in the mouse sections (the graphics card and monitor sections are different though). I can't work out what is causing the problem. Can anyone please help. John. The section of the log file relating to the errors is:- --------------------- (**) Option "Protocol" "PS/2" (**) Configured Mouse: Protocol: "PS/2" (**) Option "CorePointer" (**) Configured Mouse: Core Pointer (**) Option "Device" "/dev/psaux" (==) Configured Mouse: Buttons: 3 (**) Option "Emulate3Buttons" "true" (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "Protocol" "ImPS/2" (**) Generic Mouse: Protocol: "ImPS/2" (**) Option "SendCoreEvents" "true" (**) Generic Mouse: always reports core events (**) Option "Device" "/dev/input/mice" (EE) xf86OpenSerial: Cannot open device /dev/input/mice No such device. (EE) Generic Mouse: cannot open input device (EE) PreInit failed for input device "Generic Mouse" (II) UnloadModule: "mouse" (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) Fatal server error: Caught signal 11. Server aborting ---------------- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
