Hello,
I just installed the latest etch distro (kernel 2.6.18-3-686) onto a
whitebox intel pc running an Adaptec 2420sa raid controller and 4x sata
750gb hd's. The raid is configured as raid5 on three drives with the 4th
running hotspare.
The etch installer booted fine, saw the raid vol, let me partition it
and run a full install. I installed the grub loader into mbr and all
looked fine and dandy.
The unit boots to the grub menu just fine. When I select the kernel to
boot, it gives me the folloeing and just hangs:
----------------------------------------------------
Booting 'Debian GNU/Linux, kernel 2.6.18-3-686'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.18-3-686 root=/dev/sda1 ro
[Linux-bzImage, setup=0x1e00, size=0x131990]
initrd /boot/initrd.img-2.6.18-3-686
[Linux-initrd @ 0x1fba9000, 0x44675b bytes]
savedefault
----------------------------------------------------
Any suggestions?
I booted to rescue mode and mounted the partition. The kernel images are
there and look ok.
Thanks,
-kyle
begin:vcard
fn:Kyle Messineo
n:Messineo;Kyle
org:Just Trust Solutions, Inc.
adr;dom:Suite 300;;12520 Prosperity Drive;Silver Spring;MD;20904
email;internet:[EMAIL PROTECTED]
title:IT/Tech Manager
tel;work:(301)622-9001
tel;fax:(301)622-9020
x-mozilla-html:FALSE
version:2.1
end:vcard
