Hi there, Followed the instructions and purged hotplug, but now nothing I plug into my usb ports gets detected, and no entries in either kernel or daemon message logs show any hint that anything happened at all. The devices (mouse and disk) power up, so I doubt that the ports are simply dead. When I plug my CF card into the reader, that gets recognized and I can mount the disk as usual. So udev is not completely unaware of the world around it. Have not done any configuration myself; all standard debian testing stuff as installed by the package. Updated my system again just today in hopes something would change, but no go. Here are some stats about my system: Fujitsu P-Series Lifebook (used to know what number...)
uname -a: Linux xxxxx 2.6.18-3-686 #1 SMP Mon Dec 4 16:41:14 UTC 2006 i686 GNU/Linux cat /proc/bus/usb/devices: T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.18-3-686 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.18-3-686 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.18-3-686 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms Dunnow why there should be three hubs; the laptop has two connectors... Anyway: I take the above dump to mean that usb in general is acknowledged to exist on my machine. Udev documentation on the web most helpfully points out that unless I want special device names I better not screw with the standard configurations... Oh, and lspci yields usb-wise: 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) lsusb yields: Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Any other diagnostics I should use? (And of course, mouse and disk are plugged in...) Thanks for any help, and please put my e-mail into your reply cc; the enourmous traffic on debian-user forced me off the list a long time ago. Thanks in advance, Kai ------------------------------------------------------------------------ Kai Martens University of Utah Assistant Professor Department of Physics Tel: (801) 585-5503 115 South 1400 East Fax: (801) 581-6256 James Fletcher Bldg. Room 201 E-mail: [EMAIL PROTECTED] Salt Lake City Office: INSCC 216 Utah 84112-0830, USA ------------------------------------------------------------------------ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
