On Fri, Jan 26, 2007 at 09:29:14AM +0000, john gennard wrote: > Normally, I use a Sound Card, but with a new Asrock > 775Dual-VSTA board, there's a front panel socket which > I'd like to try, but I don't understand the connectors. > > The M/board Manual has 'Front Panel Audio Header' > '(9-pin-HD_AUDIO1)' and pins for 'GND, Presence, Mic_Ret, > Out_Ret, Mic2 L, Mic2 R, Out2 R, J Sense, and Out2 L'. > The case has a bunch of 7 connectors, viz:- > 'Spkout R, Mic bias, Return L. Mic in, Return R, > Spkout L, and Gnd'. How do I connect (ie. which connector > to which pin)? Also what would the two extra pins be > for if I had connectors extra connectors? > > Also, there is a 3pin HDMI_SPDIF Header on the board, > but after a quick read I've decided to leave that for a > later date as my audio needs are very basic (I was brought > up when a crystal set and record/cylinder player were > state of the art - later we had radiograms which were > 'rocket science') > > Can someone please help. > > Also, I have 6 sockets on the rear of the M/board. These > are 'Side speaker, Rear speaker, Central/bass, Line in, > Front speaker and Microphone'. I have a number of Speakers > including a Cambridge Soundworks EAX, (a central box and 4 > small 'satellite' speakers). I've only ever been able to get > this lot to work on my main box using a single jack plug, > and then only the central box and two small speakers give > out any sound. > Hi John, You should do your own research. Here is the pdf for your board, it has instructions. http://www.asrock.com/manual/775Dual-VSTA.pdf (hint: the green plug is for 2 channel audio) This is not a Gnu/linux or Debian issue. Cheers, Kev
-- | .''`. == Debian GNU/Linux == | my web site: | | : :' : The Universal |mysite.verizon.net/kevin.mark/| | `. `' Operating System | go to counter.li.org and | | `- http://www.debian.org/ | be counted! #238656 | | my keysever: subkeys.pgp.net | my NPO: cfsg.org |
signature.asc
Description: Digital signature
