Hi all,
This morning I woke up to a cheery smartd error message:
Device: /dev/hda, ATA error count increased from 0 to 2
This is the first time smartd has ever complained about the disk.
I rebooted and fsck complained about errors on that filesystem but didn't
give any chatter about repairing any.
My question is, is the disk failing? Do I need to begin pursuing warranty
replacement, and with what urgency?
In the syslog:
Jan 2 07:38:13 reidster kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Jan 2 07:38:17 reidster kernel: hda: dma_intr: error=0x40 { UncorrectableError
}, LBAsect=8152823, high=0, low=8152823, sector=8152822
Jan 2 07:38:17 reidster kernel: ide: failed opcode was: unknown
Jan 2 07:38:17 reidster kernel: end_request: I/O error, dev hda, sector 8152822
Jan 2 07:38:17 reidster kernel: EXT3-fs error (device hda5):
ext3_get_inode_loc: unable to read inode block - inode=228624, block=458828
Jan 2 07:38:17 reidster kernel: Remounting filesystem read-only
Jan 2 07:38:17 reidster kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Jan 2 07:38:17 reidster kernel: hda: dma_intr: error=0x40 { UncorrectableError
}, LBAsect=8152823, high=0, low=8152823, sector=8152822
Jan 2 07:38:17 reidster kernel: ide: failed opcode was: unknown
Jan 2 07:38:17 reidster kernel: end_request: I/O error, dev hda, sector 8152822
Jan 2 07:38:17 reidster kernel: EXT3-fs error (device hda5):
ext3_get_inode_loc: unable to read inode block - inode=228626, block=458828
And smartctl -a /dev/hda reports:
--snip--
reidster:/home/reid# smartctl -a /dev/hda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST3160021A
Serial Number: 5JS2RBKG
Firmware Version: 8.01
User Capacity: 160,041,885,696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Tue Jan 2 10:21:24 2007 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 054 049 006 Pre-fail Always
- 157409182
3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always
- 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 2
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 15
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always
- 153797081
9 Power_On_Hours 0x0032 083 083 000 Old_age Always
- 15442
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 21
194 Temperature_Celsius 0x0022 030 056 000 Old_age Always
- 30
195 Hardware_ECC_Recovered 0x001a 054 049 000 Old_age Always
- 157409182
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 15440 hours (643 days + 8 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f7 66 7c e0 Error: UNC at LBA = 0x007c66f7 = 8152823
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f6 66 7c e0 00 15:18:32.953 READ DMA EXT
25 00 08 2e 67 14 e0 00 15:18:32.942 READ DMA EXT
25 00 08 36 66 14 e0 00 15:18:32.935 READ DMA EXT
25 00 08 53 46 2a e0 00 15:18:32.925 READ DMA EXT
25 00 08 0e 82 14 e0 00 15:18:32.924 READ DMA EXT
Error 1 occurred at disk power-on lifetime: 15440 hours (643 days + 8 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f7 66 7c e0 Error: UNC at LBA = 0x007c66f7 = 8152823
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f6 66 7c e0 00 15:18:28.005 READ DMA EXT
25 00 08 3e 67 50 e0 00 15:18:27.966 READ DMA EXT
25 00 08 9e 65 50 e0 00 15:18:27.966 READ DMA EXT
25 00 08 6e 54 51 e0 00 15:18:27.953 READ DMA EXT
25 00 08 06 67 10 e0 00 15:18:27.946 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 15435 -
# 2 Short offline Completed without error 00% 15411 -
# 3 Short offline Completed without error 00% 15387 -
# 4 Extended offline Completed without error 00% 15366 -
# 5 Short offline Completed without error 00% 15364 -
# 6 Short offline Completed without error 00% 15340 -
# 7 Short offline Completed without error 00% 15317 -
# 8 Short offline Completed without error 00% 15293 -
# 9 Short offline Completed without error 00% 15269 -
#10 Short offline Completed without error 00% 15246 -
#11 Short offline Completed without error 00% 15222 -
#12 Extended offline Completed without error 00% 15201 -
#13 Short offline Completed without error 00% 15199 -
#14 Short offline Completed without error 00% 15175 -
#15 Short offline Completed without error 00% 15151 -
#16 Short offline Completed without error 00% 15128 -
#17 Short offline Completed without error 00% 15104 -
#18 Short offline Completed without error 00% 15081 -
#19 Short offline Completed without error 00% 15057 -
#20 Extended offline Completed without error 00% 15036 -
#21 Short offline Completed without error 00% 15034 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--snip--
I'm currently running a long self-test, and I'll re-post if the report
then shows anything.
Any help would be much appreciated.
Thanks,
Reid
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
