Bart wrote: > I'm trying to get some snmp info from my Debian Etch (testing) box. But > i don't seem to get any output. > Etch:/# snmpget -v 1 -c public localhost system.sysUpTime.0 > Error in packet > Reason: (noSuchName) There is no such variable name in this MIB. > Failed object: DISMAN-EVENT-MIB::sysUpTimeInstance > > So i tried a simple snmpwalk, but that also gives me nothing: > Etch:/# snmpwalk -v 1 -c public localhost > End of MIB > > I've verified that snmpd is listening: > Etch:/# netstat -natup | grep 161 > udp 0 0 0.0.0.0:161 0.0.0.0:* 6347/snmpd > So that seems ok. > > I've created this bare settings file in /etc/snmp/snmpd.conf > # /etc/snmp/snmpd.conf > # sec.name source community > trapsink readonly localhost public > # sec.model sec.name > group MyROGroup v1 readonly > # incl/excl subtree mask > view all included .1 80 > # context sec.model sec.level match read write notif > access MyROGroup "" any noauth exact all none none > # end of file > And stopped en started snmpd (restart only stops snmpd, this seems like > a bug). But still no results on snmpwalk: > Etch:/# snmpwalk -v 1 -c public localhost > End of MIB > > Any ideas where things go wrong? Or anyone that has got snmpwalk > working on Etch?
Ok, so after a week trying i finally got it. First off all the /etc/snmp/snmpd.conf could just simple be (dunno exactly about all the com2sec, trapsink etc keywords): # sec.name source community com2sec readonly default public # sec.model sec.name group MyROGroup v1 readonly # incl/excl subtree mask view all included .1 80 view system included .iso.org.dod.internet.mgmt.mib-2.system # context sec.model sec.level match read write notif access MyROGroup "" any noauth exact all none none And then I found the problem, it was in the command line paramters for smpd. These are 'hidden' in /etc/defaults/snmpd. I had modified these, to take out the 127.0.0.1 bit, otherwise only local snmp queries are answered. But by mistake I had also remved the - in front of smux, causing smux to be loaded which caused my problems. So, /etc/defaults/snmpd now reads: [code]# This file controls the activity of snmpd and snmptrapd # MIB directories. /usr/share/snmp/mibs is the default, but # including it here avoids some strange problems. export MIBDIRS=/usr/share/snmp/mibs # snmpd control (yes means start daemon). SNMPDRUN=yes # snmpd options (use syslog, close stdin/out/err). SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid' # snmptrapd control (yes means start daemon). As of net-snmp version # 5.0, master agentx support must be enabled in snmpd before snmptrapd # can be run. See snmpd.conf(5) for how to do this. TRAPDRUN=no # snmptrapd options (use syslog). TRAPDOPTS='-Lsd -p /var/run/snmptrapd.pid' [/code] Which is nearly identical to the distributed version, expect for the removed 127.0.0.1. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
