libre fan wrote:
>Last Friday I updated Debian (lot of xorg stuff was updated) and when I
>rebooted I got this message on the screen: out of scan range
I reconfigured several times trying to correct errors, and I compared the
original Xfree config file with the present xorg.config. I really don't know
how to put the matter straight. I set the default depths at 16 then later at
24. I set the default and only resolution at 1024x768 because this has
always worked. Here are snippets from the latest Xorg.log
(/var/log/Xorg.0.log):
....
(--) MGA(0): Chipset: "mgag200"
(**) MGA(0): Depth 24, (--) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xF5000000
....
(--) MGA(0): VideoRAM: 8192 kByte
....
(II) MGA(0): Supported VESA Video Modes:
...
(II) MGA(0): [EMAIL PROTECTED] (interlaced)
(II) MGA(0): [EMAIL PROTECTED]
(II) MGA(0): [EMAIL PROTECTED]
(II) MGA(0): [EMAIL PROTECTED]
(II) MGA(0): [EMAIL PROTECTED]
...
(==) MGA(0): Min pixel clock is 17 MHz
(--) MGA(0): Max pixel clock is 250 MHz
(II) MGA(0): Sony CDP-110GS/EST: Using hsync range of 30.00-70.00 kHz
(II) MGA(0): Sony CDP-110GS/EST: Using vrefresh range of 48.00-120.00 Hz
(II) MGA(0): Clock range: 17.75 to 250.00 MHz
....
(WW) (1024x768,Sony CDP-110GS/EST) mode clock 94.5MHz exceeds DDC maximum
0MHz
(WW) (1024x768,Sony CDP-110GS/EST) mode clock 133.475MHz exceeds DDC maximum
0MHz
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
....
(--) MGA(0): Virtual size is 1024x768 (pitch 1024)
(**) MGA(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) MGA(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772
808 +hsync +vsync
...
BTW I also get font errors, like this:
(WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/misc".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/misc").
(WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/100dpi/". Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi/").
(WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi").
...
I no longer get errors in the log file still the message out of scan range
is displayed after I type startx.
Your help would be much appreciated!
cheers,
libre fan
--
View this message in context:
http://www.nabble.com/starting-X-fails%3A-out-of-scan-range-tf2330274.html#a6633861
Sent from the Debian User mailing list archive at Nabble.com.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
