On 9/12/06, Mumia W. <[EMAIL PROTECTED]> wrote:
On 09/12/2006 03:07 AM, Rocky Ou wrote:
> On 9/6/06, Mumia W. <[EMAIL PROTECTED]> wrote:
>> On 09/06/2006 02:57 AM, Rocky Ou wrote:
>> > Hey,
>> >
>> > I used dpkg-reconfigure xserver-xfree86 to configure my monitor refresh
>> > rate
>> > to Vertical 70-75 and Horizontal 80-85. in /etc/X11/XFConfig86-4 it
>> shows
>> > what I just configured with dpkg-reconfigure. The problem is it
>> actually
>> > does not act that way. The actual refresh rate is far more less. It is
>> > not a
>> > laptop and it is not LCD screen. Can any of you help me please? BTW,
>> > aptitude update and aptitude upgrade does not help neither.
>> >
>> > Thanks a lot in advance!
>> > Rocky
>> >
>>
>> Find out the actual refresh rates and plug them into
>> XF86Config-4. You can probably find this information in your
>> user manual for the device, or you can check the
>> manufacturer's or vendor's web site.
>>
>>
>>
>
> I searched the refresh rate for my monitor and it tells me the max
> resolution and refresh rate is 1028*1024 I really do not understand
> how to convert this into Xserver config.
>
> Below is my xserverconfig file but my monitor is using 1028*768 as
> resolution and some bad refresh rate which hurts my eyes.
>
> Can any of you help me please?
>
> -----------------snip begin-----------------
>
> # XF86Config-4 (XFree86 X Window System server configuration file)
> #
> # This file was generated by dexconf, the Debian X Configuration tool,
> using
> # values from the debconf database.
> #
> # Edit this file with caution, and see the XF86Config-4 manual page.
> # (Type "man XF86Config-4" at the shell prompt.)
> #
> # This file is automatically updated on xserver-xfree86 package upgrades
> *only*
> # if it has not been modified since the last upgrade of the xserver-xfree86
> # package.
> #
> # If you have edited this file but would like it to be automatically
> updated
> # again, run the following commands as root:
> #
> # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
> # md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
> # dpkg-reconfigure xserver-xfree86
>
> Section "Files"
> FontPath "unix/:7100" # local font server
> # if the local font server has problems, we can fall back on these
> FontPath "/usr/lib/X11/fonts/misc"
> FontPath "/usr/lib/X11/fonts/cyrillic"
> FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/Type1"
> FontPath "/usr/lib/X11/fonts/CID"
> FontPath "/usr/lib/X11/fonts/Speedo"
> FontPath "/usr/lib/X11/fonts/100dpi"
> FontPath "/usr/lib/X11/fonts/75dpi"
> EndSection
>
> Section "Module"
> Load "GLcore"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc104"
> Option "XkbLayout" "us"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/psaux"
> Option "Protocol" "ImPS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
> Section "InputDevice"
> Identifier "Generic Mouse"
> Driver "mouse"
> Option "SendCoreEvents" "true"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "Device"
> Identifier "Generic Video Card"
> Driver "vesa"
> EndSection
>
> Section "Monitor"
> Identifier "TRZ:b32f"
> HorizSync 65-70
> VertRefresh 80-85
> Option "DPMS"
> Gamma 1.70 1.70 1.70 # created by KGamma
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "Generic Video Card"
> Monitor "TRZ:b32f"
> DefaultDepth 24
> SubSection "Display"
> Depth 1
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "800x600" "640x480"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> InputDevice "Generic Mouse"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
> ---------------------snip end ------------------------
>
> What command I can use so that I can find out my graphic card info and
> therefore find the right driver for it? dpkg-reconfigure
> xserver-xfree86 give me a long list of available drivers, how can I
> know what should I use please?
>
> Thanks a lot!
> Rocky
>
Keep correspondence on the list for your benefit and the
benefit of others.
The predefined modes such as 1024*768 depend upon correct
horizontal sync rate and vertical refresh rate. See "man
XF86Config-4"; in your XF86Config-4, HorizSync is 65-70, and
VertRefresh is 80-85. Neither of these may be correct; check them.
You get the correct horizontal and vertical refresh rates from
your monitor manual. Without them X is unable to correctly
determine which video modes work on your monitor.
HTH
Thanks very much for the reply!
I found the vertical and horizontal refresh rates from vendor's
website and input them into the XF86Config-4 and I could change the
resolution now. The problem is that it seem the refresh rate is still
too low. I think maybe the graphic driver I choose was wrong. Can any
of you tell me what command I can use to see which graphic card I'm
using please? Plus, If any of you could give me a hint on how to
select the driver from that long list, I would really appreciate it?
Thanks,
Rocky
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
