Hi list,
I have installed Debian Sarge on an IBM xSeries 306 and am using RAID1
with LVM on my two disks. However, when recompiling the kernel to
2.6.17.9 and using modules for most of the time, I cannot boot into my
system anymore.
The kernel gives me this at boot:
raid1: raid set md1 active with 2 out of 2 mirrors
madm: /dev/md1 has been started with 2 drives.
mkdir: cannot create directory '/devfs/raid': Read-only file system
mount: unknown filesystem 'devfs'
/dev/mapper/control: mknod failed: No such file or directory
Failure to communicate with kernel device-mapper driver.
/dev/mapper/control: mknod failed: No such file or directory
Failure to communicate with kernel device-mapper driver.
Incompatible libdevmapper 1.01.00-ioctl (2006-01-17)(compat) and kernel driver
0 logical volume(s) in volume group "raid" now active
umount: /dev: not mounted
umount: devfs: not mounted
mount: unknown filesystem type 'devfs'
umount: devfs: not mounted
pivot_root: No such file or directory
/sbin/init: 432: cannot open dev/console: No such file
Kernel panic - not syncing: Attempted to kill init!
Any ideas?
--
Kim Christensen
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
