On Wed, 16 Aug 2006 16:05:50 +0200 Mirto Silvio Busico <[EMAIL PROTECTED]> wrote:
> > > > Probably I'm not able to see the memory card mounted. > When I insert the memory card, I didn't see it not in mount, nor > appears an icon (as it does for usb pen drive).. > If I look at PCI elements I see: > ... > msb01:~# lspci > 00:00.0 Host bridge: ATI Technologies Inc RS300 Host Bridge (rev 02) > 00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge > 00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 > (rev 01) 00:13.1 USB Controller: ATI Technologies Inc OHCI USB > Controller #2 (rev 01) 00:13.2 USB Controller: ATI Technologies Inc > EHCI USB Controller (rev 01) 00:14.0 SMBus: ATI Technologies Inc ATI > SMBus (rev 1a) 00:14.1 IDE interface: ATI Technologies Inc ATI Dual > Channel Bus Master PCI IDE Controller > 00:14.3 ISA bridge: ATI Technologies Inc Unknown device 434c > 00:14.4 PCI bridge: ATI Technologies Inc Unknown device 4342 > 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 > Audio Controller (rev 01) > 00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01) > 01:05.0 VGA compatible controller: ATI Technologies Inc RV350 > [Mobility Radeon 9600 M10] > 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host > Controller (rev 80) > 02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 > 802.11abg NIC (rev 01) > 02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > 02:04.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus > Controller 02:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory > Stick Card Reader Controller > 02:04.2 Class 0805: ENE Technology Inc ENE PCI Secure Digital Card > Reader Controller > 02:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology > Inc: msb01:~# > ... > > The last four lines seems to indicate that the card reader is working. > > Mybe I'm doing something wrong. lspci does not indicate that the device is working, it just reports what devices on the pci bus report. The devices still need drivers/modules. -- Greg Madden -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
