Hi,
I used CDMA phone to connect Internet. With sarge (kernel 2.6.8) it worked fine with ti_usb_3410_5052 and wvdial. But with Debian etch it gives an error saying
ti_usb_3410_5052 probe failed with error -5
I think I have missed some kernel parameters, just a wild guess, any clues please?
thanks,
Dinesh
$uname -a
Linux debian 2.6.15-1-686
#dmesg
usb 1-2: USB disconnect, address 6
usb 1-2: new full speed USB device using uhci_hcd and address 7
ti_usb_3410_5052 1-2:1.0: TI USB 3410 1 port adapter converter detected
usb 1-2: reset full speed USB device using uhci_hcd and address 7
usb 1-2: device firmware changed
ti_usb_3410_5052: probe of 1-2:1.0 failed with error -5
usb 1-2: USB disconnect, address 7
usb 1-2: new full speed USB device using uhci_hcd and address 8
usb 1-2: configuration #1 chosen from 2 choices
ti_usb_3410_5052 1-2:1.0: TI USB 3410 1 port adapter converter detected
ti_usb_3410_5052: probe of 1-2:1.0 failed with error -5
#lsusb -v
Bus 001 Device 008: ID 0451:3410 Texas Instruments, Inc. TUSB3410 Microcontroller
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0451 Texas Instruments, Inc.
idProduct 0x3410 TUSB3410 Microcontroller
bcdDevice 1.00
iManufacturer 1 Texas Instruments
iProduct 2 TUSB3410 Boot Device
iSerial 3 TUSB3410
bNumConfigurations 2
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 2
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 1
Device Status: 0x0001
Self Powered
I used CDMA phone to connect Internet. With sarge (kernel 2.6.8) it worked fine with ti_usb_3410_5052 and wvdial. But with Debian etch it gives an error saying
ti_usb_3410_5052 probe failed with error -5
I think I have missed some kernel parameters, just a wild guess, any clues please?
thanks,
Dinesh
$uname -a
Linux debian 2.6.15-1-686
#dmesg
usb 1-2: USB disconnect, address 6
usb 1-2: new full speed USB device using uhci_hcd and address 7
ti_usb_3410_5052 1-2:1.0: TI USB 3410 1 port adapter converter detected
usb 1-2: reset full speed USB device using uhci_hcd and address 7
usb 1-2: device firmware changed
ti_usb_3410_5052: probe of 1-2:1.0 failed with error -5
usb 1-2: USB disconnect, address 7
usb 1-2: new full speed USB device using uhci_hcd and address 8
usb 1-2: configuration #1 chosen from 2 choices
ti_usb_3410_5052 1-2:1.0: TI USB 3410 1 port adapter converter detected
ti_usb_3410_5052: probe of 1-2:1.0 failed with error -5
#lsusb -v
Bus 001 Device 008: ID 0451:3410 Texas Instruments, Inc. TUSB3410 Microcontroller
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0451 Texas Instruments, Inc.
idProduct 0x3410 TUSB3410 Microcontroller
bcdDevice 1.00
iManufacturer 1 Texas Instruments
iProduct 2 TUSB3410 Boot Device
iSerial 3 TUSB3410
bNumConfigurations 2
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 2
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 1
Device Status: 0x0001
Self Powered
--
W.Dinesh Premalal
http://xydinesh.blogspot.com/
