Thanks Daniel and Bruno for replying. I was beginning
to think that no one was going to reply.
On 6/28/06, Daniel wrote:
> Now the problem is that tvtime only shows me the last channel I viewed
> under WindowsXP. Other than that no other frequency is detected.
If you can see the picture, then your card is configured. Have you tried
scanning for channels?
Yes, I have. But one thing I forgot to mention in my previous post is that
if I boot into windows, watch a channel, then reboot into linux, I can see
the channel last viewed under windows (but no other channel, and tvtime-scanner
detects no other channel). However, if I cold boot into linux,
tvtime-scanner detects
no channel and no picture is displayed.
On 6/28/06, Bruno Buys wrote:
Try playing with the tuner value in that modprobe line. Are you sure 5
is good? Did you see this http://www.bttv-gallery.de/ ?
Remember to rmmod before each modprobe trial.
According to http://www.bttv-gallery.de/ my card number is 78,
and tuner=5
-----------------------------------------------------------------
chips: 25878-13,
Tuner: TN 5V TNF-9831-B/DFF BG+DK checked
pcb: 878TV REV:D
sticker on backside: VS-TV878RF Made in Taiwan 04111260162
bttv0: Bt878 (rev 17) at 0000:02:0c.0, irq: 11, latency: 32, mmio: 0xef000000
bttv0: using: Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF
[card=78,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
bttv0: using tuner=5
------------------------------------------------------------------
The KWorld card I have mentions "VS-TV878RF" on the box. Yesterday,
after some googling, I found out about the btspy windows utility. So I
used it to get info about the card. I found that the guy who mentioned it
(http://ubuntuforums.org/showthread.php?t=160271)
got exactly the same values as my run of btspy gave me.
So I tried his modprobe line (after rmmod bttv):
----------------------------------------------
modprobe bttv card=78 radio=1 tuner=38 pll=1 gbuffers=4 gpiomask=0x1c0007 \
audiomux=0x080000,0x000001,0x080000,0x080000,0x000001
----------------------------------------------
But still no progress.
I thought my tuner must be a different one.
So, I booted into windows, copied the frequencies of some
working tv channels and went to linux (cold boot) and created a custom
stationlist.xml with those channels. After that I tried this:
-------------------------------------------------
for i in `seq 0 45`; do
rmmod bttv;
modprobe bttv card=78 radio=1 pll=1 tuner=$i;
sleep 1;
tvtime --frequencies=custom --norm=PAL;
done
--------------------------------------------------
None of the 45 tuners worked, i.e. tvtime could not
show any of those channels :-(
I am getting out of ideas and google is not giving out any new
information. Please suggest if I should try anything else.
Regards,
Santanu
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
