hello Jacek,
Check out the howto link for a raid1 install from sarge installer.
http://nepotismia.com/debian/raidinstall/
It may help you get the raid 1 up and running
Regards
peter colton
On Monday 29 May 2006 16:15, jacek wrote:
> Hi all,
>
> I set up raid 1 during installing system with kernel 2.4.27-2, then i used
> mdadm to create mdadm.conf file . my hard drives was detected as
> /dev/hdc[1-9] /dev/hde[1-9] because the kernel was missing proper drivers ,
> so then i compiled new kernel 2.6.16 and drives changed their names to
> /dev/sda[1-9] and /dev/sdb[1-9] after that i could not boot from raid at
> all. Even if boot from live cd assemble raid with /dev/sda[1-9]
> /dev/sdb[1-9] , create mdadm.conf file with proper names , during the boot
> it still wanted reassemble raid using /dev/hdc /dev/hde names?? , ( of
> course it complained that it couldn't find these devices ).
> Have you ever had such problem ?
> Any help appreciate
>
> Jacek
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
