-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Monday 08 May 2006 18:02, Kercso Jozsef <[EMAIL PROTECTED]> was heard to say: > Hi. > after few hours of trying, and trying I have found the problem: > it looks like the recent nvidia driver does not sends the signal to > the TV when the resolution is 800x600. I have modified the line > Option "MetaModes" "1024x768, NULL; 800x600, 800x600; > 640x480, NULL" to > Option "MetaModes" "1024x768,1024x768; 800x600,NULL; > 640x480,NULL" and now it works with the resolution 1024x768. > > I don't know if this is a feature or a bug, but finaly is resolved. > :) ... > >> Section "Monitor" > >> > >> # These are the DDC-probed settings and modelines > >> Identifier "Monitor0" > >> ModelName "MAX 0bd1" > >> HorizSync 30.0 - 70.0 > >> VertRefresh 50.0 - 160.0 > >> ModeLine "640x480" 25.2 640 648 744 784 480 482 484 > >> 509 -hsync -vsync ModeLine "640x480" 31.5 640 656 720 840 > >> 480 481 484 500 -hsync -vsync ModeLine "640x480" 36.0 640 > >> 696 752 832 480 481 484 509 -hsync -vsync ModeLine > >> "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync > >> ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 > >> +hsync +vsync ModeLine "800x600" 56.2 800 832 896 1048 600 > >> 601 604 631 +hsync +vsync ModeLine "1024x768" 78.8 1024 > >> 1040 1136 1312 768 769 772 800 +hsync +vsync ModeLine > >> "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync > >> +vsync Option "DPMS" EndSection > >> > >> Section "Device" > >> Identifier "Card0" > >> Driver "nvidia" > >> VendorName "All" > >> BoardName "MX440" > >> # The following line is auto-generated by KNOPPIX mkxf86config > >> # BusID "PCI:1:0:0" > >> Option "TwinView" > >> Option "TwinViewOrientation" "Clone" > >> Option "TVOutFormat" "SVIDEO" > >> Option "SecondMonitorHorizSync" "30-50" > >> Option "SecondMonitorVertRefresh" "60" > >> Option "TVOverScan" "0.6" > >> Option "MetaModes" "1024x768, NULL; 800x600, > >> 800x600; 640x480, NULL" Option "ConnectedMonitor" "CRT, > >> TV" > >> EndSection
What is the key sequence you're using to swap between outputs? I've got an nvidia GeForce FX Go5600 in a laptop, with TV out that I just cannot make work. The special key to swap between the LCD and CRT out don't work with Linux since everything is now done Windows specific drivers rather than hardware. Is it just the "Option "connectedmonitor" "crt" that turns them both on at the same time all the time? Hopefully I won't get flamed for "hijacking threads" again. Curt- - -- September 11th, 2001 The proudest day for gun control and central planning advocates in American history -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux) iQEVAwUBRF/CLy9Y35yItIgBAQIgMgf8CHYvxvgM80F0IZ65mEI3m6cyYalUcCyd UAp4D0FruEuolneWhAt+BLPuwJKwyZ480xV7lYkcpJ5N9KPfd9dmRszTnMe40ywB C6x9JAKbiuYyA8zfgYIq7ZE9Dg7sEOP4c/IJli7OyO7sBrWcU2xj40oC4MEijbv0 fGYqHNpcamCSk9C+yWnZQ5i9NZ2htcYd3G8EFOwaIKI8/S1mo6pzv1DULX26ZrOz ExnM1SQhWOhs0rSQip/QROlbNMo3MsHF4FGGAoa6SoAOGVoMLqih4/vM8D+iNJGf LMGFvAg06AZEup3p/rWaSHEk9Vi66y+qz4n3dWKTI6u0LamC4YUscg== =nZWM -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
