A Dissabte 29 Abril 2006 18:52, Andrew Sackville-West va escriure: > > Maybe changing ACPI? Howto? Thanks :) > > good catch. try a booting with > > ACPI=off
Thanks :) Seems that I have fewer errors with bt878: [dmesg for bt878] bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). bt878_probe: card id=[0x1211bd], Unknown card. Exiting.. bt878: probe of 0000:05:02.1 failed with error -22 But doesn't works too :( Maybe the cardid? The card parameter is correct (card=39) and for the bttv module. [dmesg complete] bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:05:02.0, irq: 177, latency: 64, mmio: 0xf0001000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init] bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... found msp3400 1-0040: MSP3410G-B11 found @ 0x80 (bt878 #0 [sw]) msp3400 1-0040: MSP3410G-B11 supports nicam and radio, mode is autodetect and autoselect bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tda9887 1-004b: chip found @ 0x96 (bt878 #0 [sw]) tuner 1-0060: Chip ID is not zero. It is not a TEA5767 tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw]) tuner 1-0060: microtune: companycode=3cbf part=42 rev=94 tuner 1-0060: microtune MT2050 found, OK bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). bt878_probe: card id=[0x1211bd], Unknown card. Exiting.. -- Benjamí http://blog.bitassa.cat .
