Hi All,
I'm a newbie convert to Debian alas to this mailing list as well, so I
hope I get it right.
Well the problem I am having stem to the LITEON CD Burner, I have tried
a Philips and a Sony as well and these do not exhibit this problem. Have
even tried another LITEON CD Burner and you guessed it, the problems
seems to only be apperant with the LITEON Cd Burners.
As you will be able to see from the dump in Dmesg that it is having
problems with seek and reseting it. when I install (ide-scsi , sg ) what
happen is apperant in the dump of Messages. Has anyone experienced this
before. ?????
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST360021A, ATA DISK drive
hdc: LITE-ON LTR-32123S3S, ATAPI CD/DVD-ROM drive
hdd: CD-ROM Philips PCA403CDA, ATAPI CD/DVD-ROM drive
hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdc: set_drive_speed_status: error=0x04
ide1: Drive 0 didn't accept speed setting. Oh, well.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 40X CD-ROM drive, 128kB Cache
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Loading I2O Core - (c) Copyright 1999 Red Hat Software
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
HDLC support module revision 1.02 for Linux 2.4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, Apr 14 2002
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016.
3w-xxxx: No cards with valid units found.
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
i2o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ c180ef00
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 280k freed
Adding Swap: 1044184k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4363 Sat Apr 19
17:46:46 PDT 2003
This is the dump of Messages
Jun 14 21:36:04 debian kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings:
hda:DMA, hdb:pio
Jun 14 21:36:04 debian kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings:
hdc:DMA, hdd:DMA
Jun 14 21:36:04 debian kernel: hda: ST360021A, ATA DISK drive
Jun 14 21:36:04 debian kernel: hdc: LITE-ON LTR-32123S3S, ATAPI CD/DVD-ROM drive
Jun 14 21:36:04 debian kernel: hdd: CD-ROM Philips PCA403CDA, ATAPI CD/DVD-ROM drive
Jun 14 21:36:04 debian kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 14 21:36:04 debian kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jun 14 21:36:04 debian kernel: hda: 117231408 sectors (60022 MB) w/2048KiB Cache,
CHS=7297/255/63
Jun 14 21:36:04 debian kernel: hdd: ATAPI 40X CD-ROM drive, 128kB Cache
Jun 14 21:36:04 debian kernel: Uniform CD-ROM driver Revision: 3.12
Jun 14 21:36:04 debian kernel: ide-floppy driver 0.97.sv
Jun 14 21:36:04 debian kernel: Partition check:
Jun 14 21:36:04 debian kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
Jun 14 21:36:04 debian kernel: Floppy drive(s): fd0 is 1.44M
Jun 14 21:36:04 debian kernel: FDC 0 is a post-1991 82077
Jun 14 21:36:04 debian kernel: Loading I2O Core - (c) Copyright 1999 Red Hat Software
Jun 14 21:36:04 debian kernel: I2O configuration manager v 0.04.
Jun 14 21:36:04 debian kernel: (C) Copyright 1999 Red Hat Software
Jun 14 21:36:04 debian kernel: loop: loaded (max 8 devices)
Jun 14 21:36:04 debian kernel: Compaq CISS Driver (v 2.4.5)
Jun 14 21:36:04 debian kernel: HDLC support module revision 1.02 for Linux 2.4
Jun 14 21:36:04 debian kernel: Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Jun 14 21:36:04 debian kernel: Linux port (c) 1998 Building Number Three Ltd & Jan
"Yenya" Kasprzak.
Jun 14 21:36:04 debian kernel: ide-floppy driver 0.97.sv
Jun 14 21:36:04 debian kernel: Highpoint HPT370 Softwareraid driver for linux version
0.01
Jun 14 21:36:04 debian kernel: No raid array found
Jun 14 21:36:04 debian kernel: SCSI subsystem driver Revision: 1.00
Jun 14 21:36:04 debian kernel: Red Hat/Adaptec aacraid driver, Apr 14 2002
Jun 14 21:36:04 debian kernel: DC390: 0 adapters found
Jun 14 21:36:04 debian kernel: 3ware Storage Controller device driver for Linux
v1.02.00.016.
Jun 14 21:36:04 debian kernel: 3w-xxxx: No cards with valid units found.
Jun 14 21:36:04 debian kernel: i2o_scsi.c: Version 0.0.1
Jun 14 21:36:04 debian kernel: chain_pool: 0 bytes @ c180ee80
Jun 14 21:36:04 debian kernel: (512 byte buffers X 4 can_queue X 0 i2o controllers)
Jun 14 21:36:04 debian kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jun 14 21:36:04 debian kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jun 14 21:36:04 debian kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Jun 14 21:36:04 debian kernel: TCP: Hash tables configured (established 32768 bind
32768)
Jun 14 21:36:04 debian kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jun 14 21:36:04 debian kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Jun 14 21:36:04 debian kernel: EXT3-fs: write access will be enabled during recovery.
Jun 14 21:36:04 debian kernel: kjournald starting. Commit interval 5 seconds
Jun 14 21:36:04 debian kernel: EXT3-fs: recovery complete.
Jun 14 21:36:04 debian kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 14 21:36:04 debian kernel: VFS: Mounted root (ext3 filesystem) readonly.
Jun 14 21:36:04 debian kernel: Freeing unused kernel memory: 280k freed
Jun 14 21:36:04 debian kernel: Adding Swap: 1044184k swap-space (priority -1)
Jun 14 21:36:04 debian kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal
journal
Jun 14 21:36:04 debian kernel: 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel
Module 1.0-4363 Sat Apr 19 17:46:46 PDT 2003
Jun 14 21:36:04 debian kernel: usb.c: registered new driver usbdevfs
Jun 14 21:36:04 debian kernel: usb.c: registered new driver hub
Jun 14 21:36:04 debian kernel: usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
Jun 14 21:36:04 debian kernel: usb-uhci.c: High bandwidth mode enabled
Jun 14 21:36:04 debian kernel: usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 10
Jun 14 21:36:04 debian kernel: usb-uhci.c: Detected 2 ports
Jun 14 21:36:04 debian kernel: usb.c: new USB bus registered, assigned bus number 1
Jun 14 21:36:04 debian kernel: hub.c: USB hub found
Jun 14 21:36:04 debian kernel: hub.c: 2 ports detected
Jun 14 21:36:04 debian kernel: usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10
Jun 14 21:36:04 debian kernel: usb-uhci.c: Detected 2 ports
Jun 14 21:36:04 debian kernel: usb.c: new USB bus registered, assigned bus number 2
Jun 14 21:36:04 debian kernel: hub.c: USB hub found
Jun 14 21:36:04 debian kernel: hub.c: 2 ports detected
Jun 14 21:36:04 debian kernel: usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 10
Jun 14 21:36:04 debian kernel: usb-uhci.c: Detected 2 ports
Jun 14 21:36:04 debian kernel: usb.c: new USB bus registered, assigned bus number 3
Jun 14 21:36:04 debian kernel: hub.c: USB hub found
Jun 14 21:36:04 debian kernel: hub.c: 2 ports detected
Jun 14 21:36:04 debian kernel: usb-uhci.c: v1.275:USB Universal Host Controller
Interface driver
Jun 14 21:36:04 debian kernel: usb-ohci.c: USB OHCI at membase 0xe0a2f000, IRQ 17
Jun 14 21:36:04 debian kernel: usb-ohci.c: usb-00:0b.1, NEC Corporation USB (#2)
Jun 14 21:36:04 debian kernel: hub.c: USB new device connect on bus3/1, assigned
device number 2
Jun 14 21:36:04 debian kernel: usb.c: new USB bus registered, assigned bus number 4
Jun 14 21:36:04 debian kernel: hub.c: USB hub found
Jun 14 21:36:04 debian kernel: hub.c: 2 ports detected
Jun 14 21:36:04 debian kernel: hub.c: USB hub found
Jun 14 21:36:04 debian kernel: usb-ohci.c: USB OHCI at membase 0xe0a31000, IRQ 16
Jun 14 21:36:04 debian kernel: usb-ohci.c: usb-00:0b.0, NEC Corporation USB
Jun 14 21:36:04 debian kernel: hub.c: 7 ports detected
Jun 14 21:36:04 debian kernel: usb.c: new USB bus registered, assigned bus number 5
Jun 14 21:36:04 debian kernel: hub.c: USB hub found
Jun 14 21:36:04 debian kernel: hub.c: 3 ports detected
Jun 14 21:36:04 debian kernel: hub.c: USB new device connect on bus3/1/2, assigned
device number 3
Jun 14 21:36:04 debian kernel: usb.c: USB device 3 (vend/prod 0x4b8/0x103) is not
claimed by any active driver.
Jun 14 21:36:04 debian kernel: hub.c: USB new device connect on bus3/1/3, assigned
device number 4
Jun 14 21:36:04 debian kernel: usb.c: USB device 4 (vend/prod 0x46d/0x840) is not
claimed by any active driver.
Jun 14 21:36:04 debian kernel: hub.c: USB new device connect on bus3/1/4, assigned
device number 5
Jun 14 21:36:04 debian kernel: usb.c: USB device 5 (vend/prod 0x4b8/0x1) is not
claimed by any active driver.
Jun 14 21:36:04 debian kernel: usb.c: registered new driver keyboard
Jun 14 21:36:04 debian kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
Jun 14 21:36:04 debian kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Jun 14 21:36:04 debian kernel: agpgart: Maximum main memory to use for agp memory: 439M
Jun 14 21:36:04 debian kernel: agpgart: Detected Via Apollo Pro KT266 chipset
Jun 14 21:36:04 debian kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Jun 14 21:36:04 debian kernel: mice: PS/2 mouse device common for all mice
Jun 14 21:36:04 debian kernel: Linux video capture interface: v1.00
Jun 14 21:36:04 debian kernel: Colour QuickCam for Video4Linux v0.05
Jun 14 21:36:04 debian kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
Jun 14 21:36:04 debian kernel: parport0: irq 7 detected
Jun 14 21:36:04 debian kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
Jun 14 21:36:04 debian kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by
Andrey V. Savochkin <[EMAIL PROTECTED]> and others
Jun 14 21:36:04 debian kernel: eth0: OEM i82557/i82558 10/100 Ethernet,
00:90:27:7B:15:05, IRQ 17.
Jun 14 21:36:04 debian kernel: Board assembly 727095-004, Physical connectors
present: RJ45
Jun 14 21:36:04 debian kernel: Primary interface chip i82555 PHY #1.
Jun 14 21:36:04 debian kernel: General self-test: passed.
Jun 14 21:36:04 debian kernel: Serial sub-system self-test: passed.
Jun 14 21:36:04 debian kernel: Internal registers self-test: passed.
Jun 14 21:36:04 debian kernel: ROM checksum self-test: passed (0x04f4518b).
Jun 14 21:36:04 debian kernel: es1370: version v0.37 time 10:28:23 Apr 14 2002
Jun 14 21:36:04 debian kernel: es1370: found adapter at io 0xe800 irq 18
Jun 14 21:36:04 debian kernel: es1370: features: joystick off, line in, mic impedance 0
Jun 14 21:36:04 debian kernel: usb.c: registered new driver ov511
Jun 14 21:36:04 debian kernel: ov511.c: v1.48a for Linux 2.4 : OV511 USB Camera Driver
Jun 14 21:36:04 debian kernel: usb.c: registered new driver usblp
Jun 14 21:36:04 debian kernel: usb.c: ignoring set_interface for dev 5, iface 0, alt 0
Jun 14 21:36:04 debian kernel: printer.c: usblp0: USB Bidirectional printer dev 5 if 0
alt 0
Jun 14 21:36:04 debian kernel: printer.c: v0.8:USB Printer Device Class driver
Jun 14 21:36:04 debian kernel: usb.c: registered new driver usbscanner
Jun 14 21:36:04 debian kernel: scanner.c: 0.4.6:USB Scanner Driver
Jun 14 21:36:04 debian kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI
devices
Jun 14 21:36:04 debian kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Jun 14 21:36:04 debian kernel: hdc: drive not ready for command
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 0, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: hdc: irq timeout: status=0xd0 { Busy }
Jun 14 21:36:04 debian kernel: hdc: ATAPI reset complete
Jun 14 21:36:04 debian kernel: hdc: irq timeout: status=0xc0 { Busy }
Jun 14 21:36:04 debian kernel: hdc: ATAPI reset complete
Jun 14 21:36:04 debian kernel: hdc: irq timeout: status=0xc0 { Busy }
Jun 14 21:36:04 debian kernel: scsi0 channel 0 : resetting for second half of retries.
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 1, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 1) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 1, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 1) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 1, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 1) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 1, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 1) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 1, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 1) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 1, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 1) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 1, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 1) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 1, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 1) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: hdc: irq timeout: status=0xd0 { Busy }
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 1, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 1) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: hdc: ATAPI reset complete
Jun 14 21:36:04 debian kernel: hdc: irq timeout: status=0xc0 { Busy }
Jun 14 21:36:04 debian kernel: hdc: ATAPI reset complete
Jun 14 21:36:04 debian kernel: hdc: irq timeout: status=0xc0 { Busy }
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 2, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 2) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 2, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 2) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 2, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 2) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 2, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 2) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 2, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 2) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 2, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 2) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 2, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 2) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 2, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 2) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: hdc: irq timeout: status=0xd0 { Busy }
Jun 14 21:36:04 debian kernel: scsi : aborting command due to timeout : pid 2, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jun 14 21:36:04 debian kernel: SCSI host 0 abort (pid 2) timed out - resetting
Jun 14 21:36:04 debian kernel: SCSI bus is being reset for host 0 channel 0.
Jun 14 21:36:04 debian kernel: hdc: ATAPI reset complete
Jun 14 21:36:04 debian kernel: hdc: irq timeout: status=0xc0 { Busy }
Jun 14 21:36:04 debian kernel: hdc: ATAPI reset complete
Jun 14 21:36:04 debian kernel: hdc: irq timeout: status=0xc0 { Busy }
Regards
Matthew Richardson
Email [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
