i did some more research and it turns out that the midwifi driver will work with the D-link G650-B4. but when i tried compiling the driver (module?) i got the same error messages which i got trying to compile the host ap driver.
> Looks like whether or not there's a working Linux > driver for your wireless card depends on the hardware > revision of your particular card. For your card there > appear to be 3 revisions and only 1 (C1) is reported > to have a working native Linux driver. Check out this > link to help you figure out which revision you have: > http://support.dlink.com/products/DWLG650.asp > > If you are lucky and have the C1 revision, use the > MadWiFi Linux driver. If not, try the Prism or Madwifi > drivers and if you can't get them to work, fall back > to the ndiswrapper approach -- but if at all possible > use a native Linux driver. > > Once you've figured out if you have the C1 revision or > not, post back here if you need help with getting the > driver included in the kernel and other setup, or if > you need help with ndiswrapper. > > HTH > > Mark -- thanks, tom arnall north spit, ca -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
