Hi i'm using debian sarge on one computer with a asus a7v600x board (via kt600 chipset) with a custom compiled 2.6.16 kernel (with suspend2 patch). it worked perfectlly well till now, but since the primary harddisk starts producing smart errors and dma timeouts i decided to replace it with a new sata drive. in the process i wanted to migrate the main data to a sw raid1 set with the sata disc and the other ide disc in the machine (md0: raid1 for /boot, md1: raid1 with a lvm2 volume group for / and other important data, and a second lvm2 vg for other data on the sata disc).
the problem is the following: when the kernel brings up the md devices, it only brings them up in degraded mode with only the section on the ide disc active...also the lvm volume group that is only on the sata disc does not come up... if i later start the vg by hand it works and also if i hot re-add the partiotions to the raid they sync to...until the next reboot.. does anybody have any ideas/solutions by what this problem is caused (and no, the sata drive is not compiled as a module, it is in the kernel, as well as the md driver) tia yours albert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
