On Fri, 2006-03-03 at 21:12 +0200, Oğuz Yarımtepe wrote: > Cum 03 Mar 2006 01:15 tarihinde şunları yazmıştınız: > > On Fri, 2006-03-03 at 00:14 +0200, Oğuz Yarımtepe wrote: > > > Hi. I tried to install Debian Inspiron 16000 with Debian 3.1r1, rc2, > > > netsinstall and Sarge. Each time the installation failed because the > > > installed couldnt find a disk for partititoning. > > > > > > Here are outputs of some commands when i opened the machine with Knoppix: > > > > > > lspci -vv: http://pastebin.com/580921 > > > > it looks as though you have similar hardware to me. i have a debian > > inspiron 6000, and have debian running. i installed debian using a 2.4 > > kernel. then, once installed, i compiled my own kernel with certain > > atapi tricks. > > ok i installed the system with 2.4 kernel. But when i installed kde and kdm > it > couldnt opened the graphic environment. Error Apm: Bios not found
the apm error shouldn't be causing any errors with your x-server > I installed the kernel 2.6.15 this time it found the disk as scsi and gave an > error saying /dev/hda6 doenst exist. And fall to a sh shell. How did you > compile the new kernel? your /etc/fstab most likely looks similar to this: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda1 / reiserfs notail 0 1 /dev/hda5 none swap sw 0 0 /dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0 you want it to look similar to this: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/sda1 / reiserfs notail 0 1 /dev/sda5 none swap sw 0 0 /dev/scd0 /media/cdrom0 iso9660 ro,user,noauto 0 0 now we have to tell grub about the changes as well. you need to change a line inside of /boot/grub/menu.lst: you may have different numbers after hda, but just make sure it looks similar to this: # kopt=root=/dev/sda1 ro vga=0x318 save changes to this file, and run "update-grub" reboot > > > > install24 at lilo should work > > > > keep in mind that there will be no dma on the drive during the install > > process and it will seem slow. this will be corrected later with a new > > kernel that sees the drive as scsi. > > > > > lspci: http://pastebin.com/580927 > > > lsmod: http://pastebin.com/580937 > > > proc/ide/drives: http://pastebin.com/580939 > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
