Hi, I experiencing (unworkable) performance problems after a change in my hardware configuration. I added a second drive (SAMSUNG SP2504C) to my on-board Sil 3114 SATA controller). Largish I/O operations (e.g. start applications of moderate size (Openoffice, Mozilla, Synaptic) , running bonnie, hdparm -t /dev/sda, copying large files) lock up my Gnome desktop and make my music stutter ,the first one being the nastiest ;-). Running hdparm or bonnie do not show any performance problems in terms of actual throughput (see below) but the unresponsive machine is quit annoying. None of the perfomance problems appear if I do the same operations on my 3Ware 9500 RAID 5 array.
Does anyone recognize these problems and/or does that anyone have a sollution? If not, could you give me an advise as to what I could do to diagnose the probleme better? I have the following hard/software configuration: Stock Debian 2.6.15-1-amd64-k8-smp kernel - / and swap-partion on /dev/sda1 (sil 3114) - /var on /dev/sdb1 (sil 3114) - /home on /dev/sdc1 (3ware) Dual Opteron Tyan 2885 board with 2 prcs (248), 4 GB Sil 3114 on-board SATA controler with 1 WDC WD2000JD-00H and 1 SAMSUNG SP2504C, no raid 3Ware 9500S-8 RAID5 with 5 WDC WD1200SD disks Performance hints: WDC WD2000JD-00H hdparm -t /dev/sda: Timing buffered disk reads: 170 MB in 3.02 seconds = 56.28 MB/sec (desktop unresponsive and very modern music) SAMSUNG SP2504C hdparm -t /dev/sda: Timing buffered disk reads: 170 MB in 3.02 seconds = 56.28 MB/sec (desktop unresponsive and very modern music) 3Ware 9500S-8 hdparm -t /dev/sdc: Timing buffered disk reads: 374 MB in 3.01 seconds = 124.11 MB/sec (no problems what so ever) TIA -- Groeten, Joost Kraaijeveld Askesis B.V. Molukkenstraat 14 6524NB Nijmegen tel: 024-3888063 / 06-51855277 fax: 024-3608416 e-mail: [EMAIL PROTECTED] web: www.askesis.nl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
