On Sun, Feb 26, 2006 at 08:05:40PM +0200, Adorean Alexandru Raul wrote: > Hi. > > I have a 7 in 1 usb card reader an i am havin trouble mounting > divers cards. > I've read trough the manual and found some solution not including > SATA drives witch is my case. > > My question is how do i determine where the card reader is located > so i can mont it???? > > ........................................................................................... > /proc/bus/usb/devices > > T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=0aec ProdID=3260 Rev= 1.8a > S: Manufacturer=GENERIC > S: Product=USB Storage Device > S: SerialNumber=200501251639054LD > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > .................................................................................................. > > please help :) > Look at
http://www.reactivated.net/writing_udev_rules.html I don't think it addresses exactly your problem, but there is a lot of information that will help you understand how usb works in Linux. -- Paul E Condon [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
