On Mon, Feb 13, 2006 at 11:44:51PM -0500, Jerry Quinn wrote: > Hi, all. > > I bought an HP 5440 based on the recommendations of linuxprinting.org. So > far I've had no success getting the printer to work, though. At the > moment, I suspect something at the USB level. This is on etch testing as > of today. > > When I plug the printer in, I see the following in kernel.log: > > Feb 13 23:31:16 smaug kernel: usb 3-1: USB disconnect, address 3 > Feb 13 23:31:19 smaug kernel: usb 3-1: new full speed USB device using > uhci_hcd and address 4 > > Something is showing up on USB.
Hi, Do you have usblp module loaded (modprobe usblp)? When I plug my 2355 in, I see something like: Jan 27 12:56:34 server kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4911 Jan 27 12:56:34 server kernel: scsi3 : SCSI emulation for USB Mass Storage devices Jan 27 12:56:34 server kernel: usb-storage: device found at 3 Jan 27 12:56:34 server kernel: usb-storage: waiting for device to settle before scanning Jan 27 12:56:39 server kernel: Vendor: HP Model: PSC 2355 Rev: 1.00 Jan 27 12:56:39 server kernel: Type: Direct-Access ANSI SCSI revision: 02 Jan 27 12:56:39 server kernel: sd 3:0:0:0: Attached scsi removable disk sdc Jan 27 12:56:39 server kernel: sd 3:0:0:0: Attached scsi generic sg2 type 0 Jan 27 12:56:39 server kernel: usb-storage: device scan complete Those disk / mass storage entries are there b/c 2355 has some card readers in it. > Any help would be appreciated. > > Thanks in advance > Jerry Quinn Simo -- :r ~/.signature
signature.asc
Description: Digital signature
