On Monday 13 February 2006 22:26, Stewart Middleton wrote:
> I have an onboard sound card that has been working fine based on
> default settings for some time. I have added a Pinnacle TV card and
> now find that the sound card is no longer configured after boot. Can
> anybody provide advice on what config step I am missing?
>
> Debian = Sarge
>
> desktop:~# lspci | grep -i audio
> 0000:00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio
> Capture (rev 11)
> 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
> VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
>
> desktop:~# cat /proc/asound/cards
> 0 [Bt878 ]: Bt87x - Brooktree Bt878
> Brooktree Bt878 at 0xee800000, irq 169
>
> desktop:~# lsmod | grep snd_
> snd_via82xx 29604 0
> snd_ac97_codec 69508 1 snd_via82xx
> gameport 4736 2 analog,snd_via82xx
> snd_mpu401_uart 8000 1 snd_via82xx
> snd_rawmidi 25316 1 snd_mpu401_uart
> snd_seq_device 8264 1 snd_rawmidi
> snd_bt87x 14536 4
> snd_pcm_oss 54376 0
> snd_mixer_oss 19904 3 snd_pcm_oss
> snd_pcm 97480 3 snd_via82xx,snd_bt87x,snd_pcm_oss
> snd_timer 25668 1 snd_pcm
> snd 57380 14 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_raw
> midi,snd_seq_device,snd_bt87x,snd_pcm_oss,snd_mixe
> r_oss,snd_pcm,snd_timer
> snd_page_alloc 11720 3 snd_via82xx,snd_bt87x,snd_pcm
>
> As best as I can tell the right modules are loaded for the soundcard
> but /proc only sees the TV card?
Hello Stewart,
I have a Hauppauge TV card install and I all way install it on the
second pci
slot from the AGP slot. This practise was reconmended on the Hauppauge web
site. You may be having a problem with IRQ conflicts. Have a look the cards
IRQ numbers for the cards lspci -v
Regards
peter colton
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
